Abstract:In the present study, different amounts, i.e., 1-3 v/v% of 1 M ammonium phosphate monobasic, were used as an eco-friendly corrosion inhibitor to mitigate the corrosion of steel rebar exposed to simulated concrete pore (SCP) + 3.5 wt% NaCl solution at a prolonged duration. Potentiodynamic polarization results show that as the amount of inhibitor is increased, the corrosion resistance of steel rebar is increased. The steel rebar exposed to 3% inhibitor-containing SCP + 3.5 wt% NaCl solution exhibited nobler corrosion potential (Ecorr), the lowest corrosion current density (icorr), and 97.62% corrosion inhibition efficiency after 1 h of exposure. The steel rebars exposed to 3% inhibitor-containing SCP + 3.5 wt% NaCl solution revealed higher polarization resistance (Rp) and film resistance (Ro) with exposure periods compared to other samples owing to the formation of passive film. The scanning electron microscopy (SEM) of steel rebar exposed to 3% inhibitor-containing SCP + 3.5 wt% NaCl solution showed homogenous and uniform dendritic passive film which covers all over the surface, whereas, bare, i.e., SCP + 3.5 wt% NaCl solution exposed samples exhibited pitting and irregular morphology. Raman spectroscopy results confirm the formation of goethite (α-FeOOH), maghemite (γ-Fe2O3), and iron phosphate (FePO4) as a passive film onto the steel rebar surface exposed to 3% inhibitor-containing SCP + 3.5 wt% NaCl solution. These phases are responsible for the corrosion mitigation of steel rebar which are very protective, adherent, and sparingly soluble.

Beneficial and Detrimental Impacts of Molybdate on Corrosion Resistance of Steels in Alkaline Concrete Pore Solution with High Chloride Contamination

Synergistic inhibition of molybdate and phytate on chloride-induced corrosion of carbon steel in simulated concrete pore solutions

Corrosion Inhibition and Adsorption Behavior of (3-Aminopropyl)-triethoxysilane on Steel Surface in the Simulated Concrete Pore Solution Contaminated with Chloride

Chloride-induced Corrosion Patterns of Reinforcements in Simulated Pore Solutions of Calcium Sulfoaluminate Cement Concrete: an Analytical Study

Corrosion behavior and mechanism of Cr10Mo1 steel subjected to different corrosive ions in simulated concrete pore solution

Pore Solution Chemistry of Calcium Sulfoaluminate Cement and Its Effects on Steel Passivation

Passivation and Depassivation of HPB335 Carbon Steel in Simulated Concrete Pore Solution

Study on Synergistic Corrosion Inhibition Effect between Calcium Lignosulfonate (CLS) and Inorganic Inhibitors on Q235 Carbon Steel in Alkaline Environment with Cl−

Corrosion Resistance Performance of Molybdenum-Containing Weathering Steel

Effect of modified supplementary cementitious material on performance of mortar and concrete in marine environment

Function of Cu-Sb or Al microalloying on the corrosion resistance of 9Cr steel exposed to simulated concrete pore solution

Passivation and depassivation properties of Cr–Mo alloyed corrosion-resistant steel in simulated concrete pore solution

Influence of Threshold Chloride Concentration on Corrosion Behavior of Low-Alloy Steel Rebar in Concrete Pore Solutions

Corrosion Protection of Steel by NO3− and NO2− Intercalated Mg-Al Layered Double Hydroxides in Simulated Pore Solutions of Alkali-Activated Slag

Ammonium Phosphate as Inhibitor to Mitigate the Corrosion of Steel Rebar in Chloride Contaminated Concrete Pore Solution

Effect of Mo on the Corrosion Resistance of Cr-Containing Steel in a Simulated Tropical Marine Atmospheric Environment

Effectiveness Protection Performance of an Internal Blending Organic Corrosion Inhibitor for Carbon Steel in Chloride Contaminated Simulated Concrete Pore Solution

INHIBITIVE EFFECTS OF MOLYBDENATE ON IRON ARTIFACTS DURING DESALINATION PROCESS

The inhibitor effect of migrating corrosion inhibitors on Q235 steel in high alkaline environment under cathodic polarization

Revisiting the effect of molybdenum on pitting resistance of stainless steels

The Effect of Molybdenum on the Corrosion Behaviour of the High-Entropy Alloys Co1.5crfeni1.5ti0.5mox in Aqueous Environments