Abstract:In this study, the effect of Cr content on microstructure and electrochemical measurement of low alloy steel in 3.5 wt% NaCl solution was investigated using scanning electron microscope (SEM), X-ray diffractometer (XRD), X-ray photoelectron spectroscopy (XPS) and electrochemical workstation, and the CCT curves of the samples were calculated using JMatPro software. The results showed that the augmentation of Cr content inhibits the formation of ferrite and promotes the development of cementite in low alloy steels. And the reduction of Ar3 (the temperature at which austenite transforms to ferrite) and the increase in Ar1 (the temperature at which ferrite transforms to pearlite) also contribute to the expansion of the pearlite area. The XRD results show that the samples primarily consist of Fe-Cr solid solution with a body-centered cubic structure. As the Cr content increases, the peaks corresponding to the (110), (200), and (211) planes gradually enhance which means the improvement in the crystallinity of the samples. The improvement in the crystallinity can result in a decrease of grain size. Due to the suitable ratio of cementite to pearlite and the synergistic effect of grain size refinement, the Cr2 sample exhibits the best tensile property when the Cr content is 0.970 wt%. Cr(OH)3 and Cr2O3 with protective effects are generated in the corrosion film on the surface of Cr-containing low-alloy steels. And Cr also promotes the transformation of γ-FeOOH to α-FeOOH in the corrosion film because of the atomic radius of Cr3+ being smaller than that of Fe3+. These substances enhance the ability of the corrosion film to block corrosive media and protect the matrix. The results of the electrochemical measurement showed that the increasing Cr content from 0.970 to 4.657 wt% resulted in the enhancement of steel's corrosion resistance. The Cr4 sample exhibits the best corrosion resistance when the Cr content is 4.657 wt%.

Function of Cu-Sb or Al microalloying on the corrosion resistance of 9Cr steel exposed to simulated concrete pore solution

Passivation and depassivation properties of Cr–Mo alloyed corrosion-resistant steel in simulated concrete pore solution

Corrosion Inhibition and Adsorption Behavior of (3-Aminopropyl)-triethoxysilane on Steel Surface in the Simulated Concrete Pore Solution Contaminated with Chloride

Passivation and Depassivation of HPB335 Carbon Steel in Simulated Concrete Pore Solution

Pore Solution Chemistry of Calcium Sulfoaluminate Cement and Its Effects on Steel Passivation

Corrosion behavior and mechanism of Cr10Mo1 steel subjected to different corrosive ions in simulated concrete pore solution

The Electrochemical Characterization of Rebar Passivation Film in Simulated Concrete Media

Chloride-induced Corrosion Patterns of Reinforcements in Simulated Pore Solutions of Calcium Sulfoaluminate Cement Concrete: an Analytical Study

Pitting Corrosion Behaviour of New Corrosion-Resistant Reinforcement Bars in Chloride-Containing Concrete Pore Solution

Effects of Cu-content and passivation treatment on the corrosion resistance of Al0.3CuxCoCrFeNi high-entropy alloys

Influence of Threshold Chloride Concentration on Corrosion Behavior of Low-Alloy Steel Rebar in Concrete Pore Solutions

Macrocell Corrosion Behavior of Steel Bar with Different Connection

Effect of Heat Treatment on the Passive Film and Depassivation Behavior of Cr-Bearing Steel Reinforcement in an Alkaline Environment

Corrosion Resistance of Cr-bearing Rebar in Simulated Concrete Pore Solutions

Synergistic inhibition of molybdate and phytate on chloride-induced corrosion of carbon steel in simulated concrete pore solutions

Experimental study on passivation and corrosion performances of pre-rusted steel in simulated concrete pore solution

Investigating the effect of Cr content on the microstructure and electrochemical measurement of low alloy steel

Corrosion resistance of low-alloy steel in concrete subjected to long-term chloride attack: Characterization of surface conditions and rust layers

Study on effect of chloride ions on corrosion behavior of reinforcing steel in simulated polluted concrete pore solutions by scanning micro-reference electrode technique

Effects of chloride on electrochemical and stress corrosion cracking behavior of 9Cr ferritic–martensitic steel

Research on the Chloride Ion Corrosion Resistance of Cu-Sb-Added Low-Carbon Steel