Abstract:Ti and its alloys, due to their good stability and high strength-to-density ratio, have been widely used in many industry fields, such as aviation, navigation, biomedical devices, etc. It is quite necessary to improve their performance against corrosion of water pollution or other corrosive mediums in these fields. The process of thermal oxidation is an effective way to enhance their corrosion resistance while high-temperature oxidation is usually thought to have detrimental effects. However, the porous structure caused by high-temperature oxidation is found to be beneficial for preparation of superhydrophobic surface, which has gotten extensive application in improvement of metals' antcorrosion ability. In this study, a rough surface with hierarchical micro- and nano-structures was formed on Ti by a heat treatment process in atmospheric environment at 1000°C for 1 h. The following air-cooling process separated the flaky yellow oxide layer formed on Ti plate during the oxidation from the substrate and a grey porous substrate (TO) was obtained. Furthermore, TO was modified with n-octadecyltrichlorosilane (OTS), leading to the formation of superhydrophobic Ti surface (TO-OTS). The TO-OTS film exhibited a static contact angle of 166.0° and a rolling angle of 2.0° for 5 μL water droplets. The as-prepared film was characterized by XRD, FE-SEM, XPS and contact angle measurements. The results indicated that dual-scale roughness leaved by thermal oxidation endowed TO-OTS with excellent non-sticking superhydrophobicity and durability, even for some corrosive liquids including salt solution and acidic and alkali solutions at different pH values. By means of immersion test, TO-OTS displayed great non corrodibility against HF solution, with a protective mirror-like air film formed above it. Moreover, based on potentiodynamic polarization measurement in 3.5%NaCl solution, the corrosion resistance of TO-OTS was proved to have a significant enhancement with a protection efficiency of 99.1%. This is a facile method for preparation of large-scale or complex shaped superhydrophobic surfaces without requirement of expensive instrument, which may provide an effective protection for Ti under harsh environment.

A Superhydrophobic Coating On Titanium Alloys By Simple Chemical Etching

Fabrication of Modifier-Free Superhydrophobic Surfaces with Anti-Icing and Self-Cleaning Properties on Ti Substrate by Anodization Method

A Facile Approach to Fabricate A Stable Superhydrophobic Film with Switchable Water Adhesion on Titanium Surface

Preparation of superhydrophobic titanium surfaces via electrochemical etching and fluorosilane modification

Preparation of superhydrophobic films on titanium as effective corrosion barriers

Facile Fabrication of Superhydrophobic Surfaces with Low Roughness on Ti–6Al–4V Substrates Via Anodization

Preparation of Superhydrophobic Surface on Titanium Alloy via Micro-Milling, Anodic Oxidation and Fluorination

Facile fabrication of superhydrophilic/superhydrophobic surface on titanium substrate by single-step anodization and fluorination

A facile method for fabrication of superhydrophobic coating on aluminum alloy

Preparation and Properties of Superhydrophobic Titanium Alloy with Hierarchical Structure

Fluorine-free fabrication of robust self-cleaning and anti-corrosion superhydrophobic coating with photocatalytic function for enhanced anti-biofouling property

Fabrication of superhydrophobic surfaces with hierarchical structure and their corrosion resistance and self-cleaning properties

Nanostructured Superhydrophobic Titanium-Based Materials: A Novel Preparation Pathway to Attain Superhydrophobicity on TC4 Alloy

Preparation of superoleophobic and superhydrophobic titanium surfaces via an environmentally friendly electrochemical etching method

A Novel Method to Fabricate Organic-Free Superhydrophobic Surface on Titanium Substrates by Removal of Surface Hydroxyl Groups

Fabrication of superhydrophobic ti surface by thermal oxidation and its anticorrosion property

A Corrosion-Resistance Superhydrophobic TiO2 Film

Facile Fabrication of Wear-Resistant Multifunctional Surfaces on Titanium Alloy Substrate by One-Step Anodization and Modification with Silicon Dioxide Nanoparticles

A General Strategy towards Superhydrophobic Self-Cleaning and Anti-Corrosion Metallic Surfaces: An Example with Aluminum Alloy

Robust superhydrophobic film on aluminum alloy prepared with TiO 2 /SiO 2 -silane composite film for efficient self-cleaning, anti-corrosion and anti-icing

Fabrication of a Leaf-Like Superhydrophobic CuO Coating on 6061al with Good Self-Cleaning, Mechanical and Chemical Stability