Abstract:Ti and its alloys, due to their good stability and high strength-to-density ratio, have been widely used in many industry fields, such as aviation, navigation, biomedical devices, etc. It is quite necessary to improve their performance against corrosion of water pollution or other corrosive mediums in these fields. The process of thermal oxidation is an effective way to enhance their corrosion resistance while high-temperature oxidation is usually thought to have detrimental effects. However, the porous structure caused by high-temperature oxidation is found to be beneficial for preparation of superhydrophobic surface, which has gotten extensive application in improvement of metals' antcorrosion ability. In this study, a rough surface with hierarchical micro- and nano-structures was formed on Ti by a heat treatment process in atmospheric environment at 1000°C for 1 h. The following air-cooling process separated the flaky yellow oxide layer formed on Ti plate during the oxidation from the substrate and a grey porous substrate (TO) was obtained. Furthermore, TO was modified with n-octadecyltrichlorosilane (OTS), leading to the formation of superhydrophobic Ti surface (TO-OTS). The TO-OTS film exhibited a static contact angle of 166.0° and a rolling angle of 2.0° for 5 μL water droplets. The as-prepared film was characterized by XRD, FE-SEM, XPS and contact angle measurements. The results indicated that dual-scale roughness leaved by thermal oxidation endowed TO-OTS with excellent non-sticking superhydrophobicity and durability, even for some corrosive liquids including salt solution and acidic and alkali solutions at different pH values. By means of immersion test, TO-OTS displayed great non corrodibility against HF solution, with a protective mirror-like air film formed above it. Moreover, based on potentiodynamic polarization measurement in 3.5%NaCl solution, the corrosion resistance of TO-OTS was proved to have a significant enhancement with a protection efficiency of 99.1%. This is a facile method for preparation of large-scale or complex shaped superhydrophobic surfaces without requirement of expensive instrument, which may provide an effective protection for Ti under harsh environment.

A Facile Approach to Fabricate A Stable Superhydrophobic Film with Switchable Water Adhesion on Titanium Surface

Fabrication of Modifier-Free Superhydrophobic Surfaces with Anti-Icing and Self-Cleaning Properties on Ti Substrate by Anodization Method

A Superhydrophobic Coating On Titanium Alloys By Simple Chemical Etching

Facile fabrication of superhydrophilic/superhydrophobic surface on titanium substrate by single-step anodization and fluorination

Preparation of superhydrophobic films on titanium as effective corrosion barriers

Facile Fabrication of Superhydrophobic Surfaces with Low Roughness on Ti–6Al–4V Substrates Via Anodization

Preparation of Superhydrophobic Surface on Titanium Alloy via Micro-Milling, Anodic Oxidation and Fluorination

A Novel Method to Fabricate Organic-Free Superhydrophobic Surface on Titanium Substrates by Removal of Surface Hydroxyl Groups

Preparation of superhydrophobic titanium surfaces via electrochemical etching and fluorosilane modification

Fabrication of superhydrophobic ti surface by thermal oxidation and its anticorrosion property

Preparation of Stable Superamphiphobic Surfaces on Ti-6Al-4V Substrates by One-Step Anodization

Preparation and Properties of Superhydrophobic Titanium Alloy with Hierarchical Structure

A Corrosion-Resistance Superhydrophobic TiO2 Film

Facile Fabrication of Wear-Resistant Multifunctional Surfaces on Titanium Alloy Substrate by One-Step Anodization and Modification with Silicon Dioxide Nanoparticles

Preparation and Properties of Superhydrophobic Colored Film on Surface of Pure Titanium

A facile fabrication method of wettability modification of TiAl6V4 based on alkali solution treatment: Superhydrophilic, superhydrophobic and slippery surface

Durable Superhydrophobic Zn/ZnO/TiO2 Surfaces on Ti6Al4V Substrate with Self-Cleaning Property and Switchable Wettability

The Fabrication of Unwettable Superhydrophobic Surfaces by Reactive Wetting of AgCuTi into an AAO Template

Preparation of superoleophobic and superhydrophobic titanium surfaces via an environmentally friendly electrochemical etching method

Facile Fabrication of Superhydrophobic and Underwater Superoleophobic Coatings

Nanostructured Superhydrophobic Titanium-Based Materials: A Novel Preparation Pathway to Attain Superhydrophobicity on TC4 Alloy