Abstract:Recently the research on hydraulically actuated exoskeleton becomes an attractive topic for those application requirements of human performance augmentation. The control goal of this type of exoskeleton system is to minimize the human machine interaction force. And it becomes more challenging for hydraulically actuated lower limb exoskeleton where the multi-variable nonlinear dynamics is quite complicated and multiple walking phases are existing. Furthermore, since the exoskeleton is driven by the hydraulic actuators, the accurate output force tracking can not be easily realized due to the large compressibility of hydraulic oil. This paper focuses on the human machine interaction force control and the walking phase partition of the hydraulically actuated lower limb exoskeleton. Firstly, a cascade interaction force control strategy is proposed for a 3-DOF support leg which is the basic partitioned module of the lower limb exoskeleton. The spring model is built for the dynamics of human-machine interface, and a high level controller minimizing the integral of human-machine interaction force is designed to generate the desired joint trajectories of the exoskeleton which can be considered as the human motion intent. Subsequently, an independent joint based PID controller is developed in the low level to achieve the good tracking of the above generated human motion intent. Secondly, the exoskeleton system in different walking phases is partitioned into three serial chain manipulator modules. For each serial chain manipulator module, the proposed cascade interaction force controller is applied to minimize the human machine interaction force at the end effector. Finally, the walking experiments with 20Kg load on a practical hydraulically actuated lower limb exoskeleton are carried out to validate the effectiveness of the proposed approach.

Keep Safe: A Novel Static Balance Control Strategy for Lower Limb Exoskeletons

Standing Balance Control for Position Control-Based Humanoid Robot.

Simulation of Exoskeleton ZMP During Walking for Balance Control

Balance Recovery Analysis With Constraints Of Feet-Ground For Biped Robot

An adaptive control strategy for postural stability using a wearable robot

Balance recovery for lower limb exoskeleton in standing posture based on orbit energy analysis

Stability of Mina v2 for Robot-Assisted Balance and Locomotion

A Balance Rehabilitation Gait for Human and Lower Extremity Exoskeleton System to Overcome the Instability Caused by Gravity

Fall preventive gait trajectory planning of a lower limb rehabilitation exoskeleton based on capture point theory

Non-linear Sliding Mode Control of the Lower Extremity Exoskeleton Based on Human–robot Cooperation

Single-input adaptive fuzzy sliding mode control of the lower extremity exoskeleton based on human–robot interaction:

Structural Design and Experimental Analysis of the Self-Balancing Lower Limb Exoskeleton Robot

Cascade Force Control of Lower Limb Hydraulic Exoskeleton for Human Performance Augmentation

Dynamic Balance Gait for Walking Assistance Exoskeleton

Human-in-the-Loop Control of a Wearable Lower Limb Exoskeleton for Stable Dynamic Walking

A Rehabilitation Gait for the Balance of Human and Lower Extremity Exoskeleton System Based on the Transfer of Gravity Center.

Lower Limb Exoskeleton Gait Planning Based on Crutch and Human-Machine Foot Combined Center of Pressure

Human Foot Force Informs Balance Control Strategies when Standing on a Narrow Beam

Exoskeleton Gait Control Strategy to Overcome Lateral Overbalance

ExoRecovery: Push Recovery with a Lower-Limb Exoskeleton based on Stepping Strategy

A Stepping Gait Trajectory Design Based on Hip Height Variation of Swing Leg for the Balance of Lower Extremity Exoskeleton.