Abstract:In recent years, due to the increase in the incidence of traffic accidents, the number of people with limb injuries has also increased. At the same time, among the aging population, neurological diseases or cardiovascular and cerebrovascular diseases have caused many people to have limb hemiplegia. It has been clinically proven that the use of rehabilitation equipment can help patients with limb injuries to restore limb motor function. This paper takes wearable lower limb rehabilitation exoskeleton as the research object, and its main contents are mechanical structure design, kinematics analysis, gait planning, virtual prototype simulation, and experimental verification and analysis. Based on the physiological characteristics of human body and the principle of comfortable and reliable wearing, this paper designs wearable exoskeleton for lower limb rehabilitation. Firstly, the physiological structure characteristics and movement mechanism of human lower limbs were studied and analyzed. By referring to the rotation range and height and size of each joint of human lower limbs, the overall scheme of wearable lower limb rehabilitation exoskeleton was designed and the degree of freedom was allocated. At the same time, Solidworks was used to establish a three-dimensional model. On the basis of a 3D model, a kinematics model was established, and the forward kinematics solution was obtained by using homogeneous coordinate transformation. Since the inverse kinematics solution was relatively complicated, the inverse kinematics solution was conducted in this paper according to the geometric relations of the joints of the lower limbs. Kinematics analysis of the exoskeleton structure of wearable lower limb rehabilitation was carried out to lay a theoretical foundation for gait planning. The off-line gait planning was carried out by using the method based on ZMP stability criterion, and the gait planning was divided into five stages: squat, start, middle step, stop and rise, and the motion trajectory of the center of mass and ankle joint was planned. Based on the inverse kinematics formula, the function of the change of joint angle with time in walking process is derived. The virtual prototype is established in ADAMS, and the simulation of virtual prototype is carried out by using the function of gait planning's joint angle and time. The correctness of structural design and gait planning was verified by measuring the trajectories of the centroid and ankle joints in each gait stage and the functional relationship between the rotation angle of each joint and time. Then, using a 3D dynamic capture system to capture the human lower limb motion trajectory of each joint, each joint trajectory data output, using the MATLAB software to output data, gets the joint trajectory change over time function curve and is used to verify feasibility and applicability of human gait planning. Through the research and analysis of the joints of the lower limbs of the human body, it can be concluded that the hip joint and the knee joint have 3 degrees of freedom, respectively, and the knee joint has 1 degree of freedom.

A Rehabilitation Gait for the Balance of Human and Lower Extremity Exoskeleton System Based on the Transfer of Gravity Center.

A Balance Rehabilitation Gait for Human and Lower Extremity Exoskeleton System to Overcome the Instability Caused by Gravity

Simulation of Exoskeleton ZMP During Walking for Balance Control

A Stepping Gait Trajectory Design Based on Hip Height Variation of Swing Leg for the Balance of Lower Extremity Exoskeleton.

Dynamic Balance Gait for Walking Assistance Exoskeleton

Fall preventive gait trajectory planning of a lower limb rehabilitation exoskeleton based on capture point theory

Online Gait Planning of Lower-Limb Exoskeleton Robot for Paraplegic Rehabilitation Considering Weight Transfer Process

Design and analysis of a multi-motion self-balancing lower limb exoskeleton based on flat terrain

Real Time Gait Planning for a Mobile Medical Exoskeleton with Crutche.

Lower Limb Exoskeleton Gait Planning Based on Crutch and Human-Machine Foot Combined Center of Pressure

Integration Mode of Standing Balance and Trajectory Training Based on Lower Limb Rehabilitation Exoskeleton

A Real-Time Stability Control Method Through sEMG Interface for Lower Extremity Rehabilitation Exoskeletons

Human-in-the-Loop Control Strategy of Unilateral Exoskeleton Robots for Gait Rehabilitation

The Wearable Lower Limb Rehabilitation Exoskeleton Kinematic Analysis and Simulation

Development and analysis of a gravity-balanced exoskeleton for active rehabilitation training of upper limb

Four-legged gait planning method for a mobile medical exoskeleton with a pair of crutches

Design and Control of a Flexible Exoskeleton to Generate a Natural Full Gait for Lower-limb Rehabilitation

Design and Experimental Verification of a Parallel Hip Exoskeleton System for Full-Gait-Cycle Rehabilitation

Exoskeleton Gait Control Strategy to Overcome Lateral Overbalance

Model Analysis and Experimental Study of Lower Limb Rehabilitation Training Device Based on Gravity Balance

Structural Design and Experimental Analysis of the Self-Balancing Lower Limb Exoskeleton Robot