Abstract:Inflated membranes are flexible structures and very sensitive to wind load. Wrinkling deformation of the enveloping membrane can further intensify the trend of wind-induced damage. This paper aims at studying the effect of wrinkling deformation on the bearing capacity of inflated membranes under wind. The wrinkling model based on the stability theory of plates and shells is adopted to consider the effect of wrinkling deformation. The air-membrane interaction is also included by treating the internal air as a kind of potential-based fluid. The wind load is simplified as a uniformly distributed pressure or suction on the top membrane. Both geometrical and physical nonlinearities of the membrane are considered. The finite element model of an ETFE (Ethylene-Tetra-Fluoro-Ethylene) cushion is then developed to analyze the effect of wrinkling deformation on the bearing capacities of inflated membranes under wind load for different influencing parameters such as initial internal pressure, side length, rise-to-span ratio. The results indicate that (a) Wrinkling deformation has a great effect on the failure mode and its transition, and can significantly decrease the bearing capacity as well; (b) Bearing capacity increases with the initial internal pressure and side length when determined by the instability failure, and decreases when determined by the strength failure; (c) Failure mode switches from the instability failure to the strength failure when the initial internal pressure or side length increases, and the transition occurs earlier when the wrinkling deformation is considered; (d) Bearing capacity varies non-monotonically with the rise-to-span ratio for wind suction and decreases consistently for wind pressure; and (e) When the rise-to-span ratio increases, the failure mode switches from the strength failure to the instability failure and a later transition is observed in the cushions with the wrinkling deformation.

Study on Bagging Effect and Rupture Failure of Membrane Structures

ETFE Air Cushion Membrane Configurations,Structural Performances and Material Properties Experiments

Drape and Inflatable Mechanics of Membrane Inflatable Structure

Cable Rupture Analysis of Inner-Outer Combined Reticulated Shell-String Structure Using VFIFE

Experimental studies on tear failure of PVC coated fabric

A Spring-Mass System Based Approach for Deployment Analysis of Inflatable Membrane Structures

Experimental Investigations into Failures and Nonlinear Behaviors of Structural Membranes with Open Cuttings

Effect of Wrinkling on the Bearing Capacity of Inflated ETFE Membranes

Test Study and Numerical Simulation of Deflation Process of an Air-Supported Membrane Structure

FINITE ELEMENT MODELLING OF INFLATABLE MEMBRANE STRUCTURE BASED ON PHOTOGRAMMETRY

Experimental Investigation into the Failure Mechanisms of Fabric Membrane Materials with Defective Flat Round Cracks

Analysis and application of the vector form intrinsic finite element for fracture and penetration of thin-membrane

Damage Constitutive Model and Numerical Simulation of In-Plane Tear Failure for Architectural Fabric Membranes

Deflation Behavior and Related Safety Assessment of an Air-Supported Membrane Structure

Random vibration of pretensioned rectangular membrane structures under heavy rainfall excitation

Advances on wind-induced dynamic disaster of tensioned membrane structures

Membrane Effect of Geosynthetic Reinforcement Subjected to Localized Sinkholes

Experimental and Numerical Study on the Dry/wet Burst Failure of Reinforced Thermoplastic Pipes

In Situ Determination of Stress Distribution of Inflatable Membrane Structure Using Force Finding Method

Dynamic and Simulation of Inflatable Multilayer Membrane Structure under Hypervelocity Impact

Numerical Studies on the Air–Membrane Interaction of ETFE Cushions