Abstract:The pretension deviation caused by two kinds of geometrical errors, manufacturing error of member length and installation deviation of anchoring joint, is investigated for a novel crescent-shaped tensile system applied as the canopy structure in Yueqing Stadium, Zhejiang, China. The deviation of anchoring joint is transformed into the length error of radial cable, and the member length error is assumed to yield Gaussian distribution. An analytical expression, which reflects the relationship between the member length errors and pretension deviations, is deduced. A different choice of active cables leads to different sensitivity matrix in this analytical expression, which indicates theoretically that the effect for controlling pretension deviation varies with the tensioning scheme adopted in the construction. A cable truss is employed as an illustrative example to investigate the validity of this method. According to the limit values of the two kinds of geometrical errors specified in China standards, the structural pretension deviations under five tensioning schemes are calculated for the crescent-shaped tensile canopy structure. The pretension sensitivity of each member category to the geometrical errors is analyzed by comparing the relative pretension deviations. The control effects on pretension deviations are also compared for these five tensioning schemes. The results indicate that distinct pretension deviations exist in the structure if only controlling the lengths of all members or the tension forces of ring cables during construction. Stretching the upper and lower radial cables and also controlling their tension forces can prominently decrease the structural pretension deviations. However, the pretension deviations of suspenders cannot be effectively controlled for any of the five tensioning schemes. (C) 2016 Elsevier Ltd. All rights reserved.

ANALYSIS OF SUPPORT DISPLACEMENT EFFECT ON SADDLE-SHAPED MEMBRANE STRUCTURE

Experimental Study on Construction Tension and Local Component Failure of Double Inner and Outer Latticed Shell String Structure

ETFE Air Cushion Membrane Configurations,Structural Performances and Material Properties Experiments

Numerical Analysis of the Pretension Deviations of a Novel Crescent-Shaped Tensile Canopy Structural System

Using Reposition Balance Method to Find Tensility Structures' Prestress

Cooperative Loading Analysis of Cable-Strut-membrane Space Structures

IMPROVED NONLINEAR FORCE DENSITY METHOD ACCOUNTING FOR 2-DIMENSIONAL DEFORMATIONS OF MEMBRANE ELEMENT

The design and analysis of tensile membrane structure--The sports facility roof of a commercial center

Design Method of Cable-Membrane Structures Considering Form-Finding Analysis and Force-Finding Analysis

Cutting Pattern Design Method of Membrane Structures

Design and Analysis of Inner and Outer Cables Suspended Membrane Structures

Combined Method for Quick Analysis of Tensile Membrane Structures

Study on Analysis Model of Deployable Space Membrane Structure

Bending-free Theory and Optimized Reposition Balance Method, Used to Find the Self-Balance Prestress of Tensility Structures

Study on Bagging Effect and Rupture Failure of Membrane Structures

An Efficient Numerical Shape Analysis for Light Weight Membrane Structures

A New Type of Configuration Analysis Method for Membrane and Cable-Membrane Structure Based on Equilibrium of Nodal Forces

DEFORMATION CHARACTERISTICS ANALYSIS OF DIAPHRAGM WALL FOR FOUNDATION PIT SUPPORT IN SOFT SOIL

FORM FINDING ANALYSIS OF TENSILE MEMBRANE STRUCTURES BY CURVED QUADRILATERAL ELEMENT

Internal Force Analysis of Tensile Membrane Structures Using Curved Quadrilateral Elements

Dynamic response of saddle membrane structure under hail impact