Abstract:Optical gyroscope is an important high-precision inertial measurement instrument, which plays significant role in defense, geological exploration and navigation. For high accuracy optical gyroscope system, a high-performance polarizer is strongly needed to filter only one polarization from Amplified Spontaneous Emission (ASE) source. Here, the plasmon-assisted structure is introduced by setting a thin metal layer above the silicon nitride (Si3N4) waveguide. The copper (Cu) is chosen as the metal layer material as it is compatible with the complementary metal-oxide-semiconductor (CMOS) fabrication process. The surface plasmons effect can simply be excited by TM polarization due to the electric field of TM polarization perpendicular to the metal layer, so that it can bring extra propagation loss. The TE polarization, on the contrary, fail to excite the surface plasmons effect as the electric field is parallel to the metal layer. To reduce the reflection caused by mode mismatch, the distance between metal layer and waveguide is increased by inserting a SiO2 layer. The chemical mechanical planarization (CMP) process allows precise thickness control of the SiO2 layer. The spiral waveguide structure is utilized to fully suppress TM polarization while the TE polarization can be well confined in broadened Si3N4 core with negligible propagation loss. The numerical results show that the working wavelength range is as large as 60 nm from 820 nm to 880 nm with the polarization extinction ratio > 30 dB and the insert loss < 0.5 dB. As far as we known, this is the first time to achieve ultra-high extinction ratio, ultra-low insertion loss, ultra-low reflection at the same time, and also achieve a working wavelength range larger than 60 nm at the center of 850 nm. Moreover, the proposed structure doesn’t require high alignment accuracy and is compatible with silicon-on-insulator fabrication technology.

A Flexible Wearable Linear-to-Circular Polarizer for GNSS Application

Single Layered Swastika-Shaped Flexible Linear-to-circular Polarizer Using Textiles for S-band Application

A Switchable Linear-to-Circular Polarizer Based on Varactor-loaded Metasurface at 30 GHz

Deployable Linear-to-Circular Polarizer Using PDMS Based on Unloaded and Loaded Circular FSS Arrays for Pico-Satellites.

A Wideband Linear-to-Circular Polarizer Based on Hexagonal FSS on PDMS Substrate for CubeSats

Ultrathin Single Layer Transmissive Dual-Band Linear to Circular Converter for Non-Adjacent Dual Orthogonal Circularly Polarized Antenna

Low-Profile Reflective Surface for Multi-Band Linear-to-Linear and Linear-to-Circular Polarization Conversion

A Metasurface-Based LTC Polarization Converter with S-Shaped Split Ring Resonator Structure for Flexible Applications

Linear and circular-polarization conversion in X-band using anisotropic metasurface

Design of a circularly polarized rectangular microstrip antenna for GPS applications

Novel Broad Band FSS Dual-Layer Circular Polarizer Based on Quarter Wave Plate

Double-layer broadband circular polarizer based on fission transmission of linear polarization for ku-band applications: MANGI et al.

A Dual‐band Linear‐to‐circular Polarization Converter with Robustness under Oblique Incidences

Single layer dual wideband linear to circular polarisation converter with integrated parasitic elements

Wideband Omnidirectional Circularly Polarized Antenna for Millimeter-Wave Applications Using Conformal Artificial Anisotropic Polarizer

An Ultrawideband Linear-to-Circular Polarizer Based on a Phase Difference Complementary Scheme

High Extinction Ratio, Low Loss and Broadband On-Chip TE-pass Polarizer for Optical Gyroscope

Notice of Removal: A Broadband Reflective Polarization Converter Based on the Metallic Grating

Broadband Vis–NIR Circular Polarizer with Cascaded Aluminum Wire‐Grid

Dual-band circular polarized microstrip antenna for GNSS application

A Metasurface-Based, Ultrathin, Dual-Band, Linear-to-Circular, Reflective Polarization Converter: Easing uplinking and downlinking for wireless communication