Abstract:In this article, a second-order 3-D bandpass polarization-rotating surface (PRS) that can rotate vertically polarized incident waves by 90° and facilitate the output of horizontally polarized waves is presented. First, each PRS element is constructed using a pair of parallel-coupled slotline sections with open-short-ends, which are etched on vertically and horizontally inserted single-layer printed circuit boards (PCBs), respectively. Then, under vertically polarized incident waves, one of the slotline sections can convert the incident spatial waves into guided waves through its open end. After which, the guided waves are coupled to the other slotline section and the electric field direction will be rotated by 90° through the coupling path, thus leading to a 90° polarization rotation. Subsequently, a direct coupling matrix is used to synthesize and design the proposed PRS based on the microwave filter theory. Investigations reveal that a desirable bandpass filtering response can be obtained by properly designing the internal coupling of the parallel-coupled slotline sections and the external coupling between the incident spatial waves and the PRS. To validate the design concept, two examples with different fractional bandwidths at the same center frequency of 5 GHz and the same return loss of 20 dB were designed, fabricated, and measured. Consequently, a good agreement was attained among the results from coupling matrices, full-wave electromagnetic (EM) simulations, and measurements. All the results demonstrate that the proposed PRSs feature simple topologies, easy fabrications, low insertion losses (ILs), high polarization-rotating ratios, and stable filtering performances under large oblique incidences. In addition, our proposed method can be applied to design higher-order PRSs with sharpened out-of-band roll-off skirts.

An Ultrawideband Linear-to-Circular Polarizer Based on a Phase Difference Complementary Scheme

Dichroic Circular Polarizers Based on Plasmonics for Polarization Imaging Applications

Polarization Control by Using Anisotropic 3-D Chiral Structures

Orthogonal Adjacent-Order Filtering Element-Based Wideband Transmissive Linear-to-Circular Polarization Converter

Dual-Band Circular Polarizers with Versatile Polarization Conversions Based on Aperture-Coupled Patch Resonators

A Multi-functional Frequency Selective Polarization Converter Based on Substrate Integrated Waveguide Cavities

Optical Circular-Polarization Modulator Employing Tilt-Poled Electrooptic Polymers

Wideband Omnidirectional Circularly Polarized Antenna for Millimeter-Wave Applications Using Conformal Artificial Anisotropic Polarizer

Flexible Rotation of Linear Polarization Conversion with a Frequency Selective Surface.

A Bandpass Frequency Selective Surface With a Low Cross-Polarization Based on Cavities With a Hybrid Boundary

Low-Profile FSS-Based Polarization-Insensitive Rasorber with Switchable Transmission Band

Broadband Resonance-Free Septum Circular Polarizer Operating Above 200 GHz

A Dual‐band Linear‐to‐circular Polarization Converter with Robustness under Oblique Incidences

A Broadband Ultra-Thin Polarization Rotator Using Periodically Loaded Parallel Strip-Lines

Single layer dual wideband linear to circular polarisation converter with integrated parasitic elements

Dual-band and high-efficiency metasurface-based circular-to-linear polarization converter

Broadband Vis–NIR Circular Polarizer with Cascaded Aluminum Wire‐Grid

Ultra-wideband linear-to-circular polarizer realized by bi-layer metasurfaces

A Multifuntional Frequency-selective Polarization Converter for broadband backward-scattering reduction

Wideband design and modeling of efficient multi-resonance reflective linear-to-circular polarization converter

Synthesis of 3-D Polarization-Rotating Surface Based on Orthogonally Inserted Parallel-Coupled Slotlines