Abstract:Titanium alloy materials are increasingly used in consumer products such as mobile phones and computers. Currently, manufacturers use ultra-high speed machining techniques to process titanium alloy materials to ensure high production efficiency. However, under the high spindle speed of 8000 rpm and a large feed rate of 4500 mm/min, the cutting speed of a 10 mm diameter milling tool reaches up to 251 m/min, which is significantly higher than the traditional cutting speed for titanium alloys (90 m/min). This ultra-high-speed cutting condition inevitably leads to a reduced tool life, consequently increasing manufacturing costs. Therefore, this paper focuses on studying methods to improve the cutting performance and tool life in titanium alloy ultra-high speed milling. First, failed milling tools on the titanium alloy processing production line were detected, and the failure modes and wear mechanisms of the tools under ultra-high speed milling conditions were analyzed. Based on this, a milling simulation model was established and calibrated through milling experiments. Then, simulation experiments were designed using the response surface methodology to reveal the impact of key tool geometric parameters on cutting performance, and the geometric parameters of the milling tool were optimized. Finally, based on the optimization results, milling tools were prepared and cutting performance and tool life experiments were conducted. Compared with the unoptimized milling tools, the optimized milling tools have significantly improved cutting performance and tool life, with cutting force reduced by 40 %–50 % and average tool life increased by 69.6 %.

Performance improvement of carbide cutting tool for Ti6Al4V alloys using electromagnetic treatment

Influence of Tool Geometrical Parameters on High Speed Cutting of Titanium Alloy Ti6Al4V

Study on the Orthogonal Cutting Process of Al7050T7451 with Uncoated and Coated Tools

Pulsed Magnetic Field Treatment of WC-TiC-Co Cutting Inserts for Improved Microstructure and Cutting Performance

Enhancing Tool Performance in High-Speed End Milling of Ti-6Al-4V Alloy: The Role of AlCrN PVD Coatings and Resistance to Chipping Wear

Research on Improving the Mechanical Properties of Ti-6Al-4V Using High-Frequency Electrical Current.

Cutting performance and surface quality of Ti-6Al-4V by longitudinal ultrasonic vibration-assisted high-speed dry milling with coated carbide tools

Enhanced carbide tool life by the electromagnetic coupling field for sustainable manufacturing

An Investigation of Cutting Performance and Action Mechanism in Ultrasonic Vibration-Assisted Milling of Ti6Al4V Using a PCD Tool

A Novel Electropulsing Treatment to Improve the Surface Strength and Repair the Pore of Additively Manufactured Ti-6Al-4V Alloy

Experimental investigation on Ti2AlNb in high-efficiency short electric arc milling

Machining Performance and Tool Wear Analysis on Cryogenic Treated Insert During End Milling of Ti-6Al-4V Alloy

Evaluation of the performance of coated carbide tools in face milling TC6 alloy under dry condition

Investigation on cutting forces and tool wear in high-speed milling of Ti-6Al-4V assisted by longitudinal torsional ultrasonic vibrations

Investigation of the effect of electrophoresis-assisted milling on machinability

Simulation Analysis and Experimental Validation of Cathode Tool in Electrochemical Mill-Grinding of Ti6Al4V

Research on cutting performance and tool life improvement methods of titanium alloy ultra-high speed milling tools

Finite element analysis of Ti 1-x Al x N coated tools cutting performance and tool wear during Ti-6Al-4V milling

Cutting Responses of Additive Manufactured Ti6Al4V with Solid Ceramic Tool under Dry High-Speed Milling Processes

Analysis of impact properties of cemented carbide by electromagnetic coupled cryogenic treatment

Influence of Microstructure and Hardness on Machinability of Heat-Treated Titanium Alloy Ti-6Al-4V in End Milling with Polycrystalline Diamond Tools