Abstract:Steel materials are highly sourced construction materials owing to their robust mechanical properties, and they are widely used in the construction industry for building bridges, tunnels, skyscrapers, towers, ship-metal parts, and other industrial metal applications. However, as steel has poor surface wear resistance, parts are susceptible to failure due to friction damage. To improve the surface wear resistance of steel materials, Ni-based WC coating was prepared by ultra-high-speed laser cladding. Using low-speed laser cladding as a reference, the surface morphology, microstructure, and wear resistance of ultra-high-speed laser cladding of Ni-based WC coatings were studied using SEM, EDS, and XRD, respectively. Experimental results revealed that the Ni-based WC coating prepared by ultra-high-speed laser cladding exhibited better surface quality compared with that prepared by low-speed laser cladding. Comparatively, ultra-high-speed laser cladding requires a smaller heat input and a faster cooling rate. However, the dilution rate of the coating is significantly reduced. In addition, ultra-high-speed laser clad- ding significantly reduces thermal damage in the WC coating; it inhibits the precipitation of carbides and formation of porosities and promotes the uniform distribution of the WC in the coating, thereby significantly reducing stress localization in the coating and also inhibits crack nucleation in the coating. Because of the reduction of porosities, cracks, and other surface defects in the coating and uniform distribution of WC particles, the Ni-based WC coating prepared by ultra-high-speed laser cladding possesses better wear resistance than that prepared by low-speed laser cladding, and the wear mechanism is abrasion.

Microstructure and Abrasive-wear Behavior Under High Temperature of Laser Clad Ni-based WC Ceramic Coating

Microstructure and abrasive-wear behavior under high temperature of laser clad ni-based wc ceramic coating

Study of Microstructure of Laser Clading Ni-based Metal-ceramics Layers and Its Abrasive-wear Behavior Under High Temperature

High-temperature Dry Friction and Wear Properties of Ni-based WC Ceramic Coating by Laser Cladding Added CeO_2

Microstructure and Wear Resistance of Ni-Based WC Coating by Ultra-High Speed Laser Cladding

Tribological Performance and Wear Mechanism of Laser Cladded NiCrAl-WC Coatings at High-Temperature

Microstructure and Wear Properties Under Dry Sliding for Micro-nano WC Composite Coatings Prepared by Laser Cladding

Microstructure and wear resistance of laser cladding Ni-WC coating on aluminum alloy

Study of Microstructure and Properties of Laser Cladding Ni60-WC + TiC Composite Coating

Microstructure and tribological properties of laser cladded TiC reinforced WC-10Co4Cr coatings at 500 °C

Microstructure and High-Temperature Tribological Properties of Laser-Cladded WC10Co4Cr–xTi2AlC Coatings

Study on Melting–Precipitation Evolution of WC in Ni/WC-12Co Coating during Laser Cladding and Tribological Properties

Microstructure and Property of Laser Cladding Ni-based Alloy Coating Reinforced by WC Particles

Effect of Heat Treatment on Microstructure and Tribocorrosion Performance of Laser Cladding Ni-65 WC Coating

High-Speed Laser Cladded Ni-Based WC Coatings: Microstructure, Friction-Wear Property and Wear Mechanism

Microstructure and Wear Resistance of Laser Cladding NiCrWB Alloy Coating on Cu Substrate

Microstructure, microhardness and corrosion resistance of laser cladding Ni–WC coating on AlSi5Cu1Mg alloy

Effects of Thermal Treatment on Microstructure and Wear Properties of Ni60/CeO2 Composite Coating 35CrMoV Steel by Laser Cladding

Microstructure, Phase Constituents and Wear Behavior of Fe/Ni-based Laser Clad Layers

Microstructure and tribological performance of novel Ni-based alloy cladding with excellent high temperature wear resistance and self-lubrication performance

Microstructure, interface characteristics and tribological properties of laser cladded NiCrBSi-WC coatings on PH 13-8 Mo steel