Abstract:An efficient intersection signal scheme is of vital significance to urban traffic operation. At present, multiperiod fixed-timing control is still the traffic signal control method adopted by many urban intersections. For the optimization problem of signal scheme selection at signalized intersections, we proposed three two-step prediction optimization methods that match the traffic arrival in different periods with the corresponding optimal signal scheme, aimed at reducing the total delay of vehicles at signalized intersections. The first method predicts the traffic flow in each entrance direction of the intersection by minimizing the mean square error (MSE), then obtains the total vehicle delay of each scheme in the signal scheme set through the Highway Capacity Manual 2010 delay formula, and finally substitutes it into the signal optimization model to obtain the optimal scheme combination. The second method directly predicts the total vehicle delay at intersections of all signal schemes by minimizing the MSE and then substitutes it into the signal optimization model to obtain the optimal scheme combination. The third method directly predicts the total vehicle delay at intersections of all signal schemes by minimizing both the MSE and the prediction error between every two schemes and then substitutes it into the signal optimization model to obtain the optimal scheme combination. Verification based on actual intersection shows that better optimization results can be obtained by integrating optimization objectives into the prediction process. Besides, some practical insights can be drawn through applicability analysis and sensitivity analysis. First, the proposed model is more suitable for intersections where traffic arrivals vary greatly. Second, with the increase of scheme differences within a certain range, the advantages of the proposed method become more obvious. Finally, it is necessary to balance the flexibility of traffic control with control effectiveness in practical applications.

Analysis of key parameters sensitivity and calibration accuracy of signal timing algorithm

Impact Of Two Calibration Strategies On Flow Simulation In Qiantang River Basin, China

Estimation of Saturation Flow Rate and Start-Up Lost Time for Signal Timing Based on Headway Distribution

Lane-Based Saturation Degree Estimation for Signalized Intersections Using Travel Time Data

A Method of Signal Timing Optimization for Spillover Dissipation in Urban Street Networks

Critical Traffic Volume Warrant of Signal Installing at Equal Weight Intersections

An Analysis of the Interactions between Adjustment Factors of Saturation Flow Rates at Signalized Intersections

Signal Coordination Algorithm Considering Vehicle Platoon Movement Characteristics on Arterial Streets

Improving Performance of Coordinated Signal Control Systems Using Signal and Loop Data

Minimum Cycle Length of Two-Phase Road Intersection

Optimization Method of Signal Timing Parameters Considering Comprehensive Efficiency of All Approach Lanes

Simulation of Departure Flow Profile at Stop Lines for Signal Approach Spillover

Estimation of Saturation Degree for Lane Groups at Signalized Intersections Using Video Imaging Detection Data

Optimization of Stretching-Segment Design and Signal Timing in Traffic Control

Signal Timing Method of Right——turn Vehicles Based on Mixed Traffic

Study on effect of flow forecasting error on traffic control performance

Critical traffic volume of traffic signal warrant under limited priority condition

Analyze Correlations of Traffic Control Plans in Urban Road Networks

A Semi-"Smart Predict, then Optimize" Method for Traffic Signal Control.

Research on the Optimal Method of Cycle Length for Signalized Intersection

Capacity of unsignalized intersection with mixed distribution headway