Abstract:This paper presents a novel 3D force sensor design based on in-situ nanocomposite strain sensors. The polymer matrix of the polyvinylidene fluoride (PVDF) and multi-walled carbon nanotubes (MWCNT) conductive filler nanocomposite film have been chosen as sensing elements for the 3D force sensor. A bioinspired tree branch design was used as the 3D force sensor’s elastic structure, that was built using thin Aluminum plates and a laser cutting fabrication process. The PVDF/MWCNT films contained piezoresistive and piezoelectric characteristics, allowing for static/low and dynamic strain measurements, respectively. Two compositions with 0.1 and 2 wt.% PVDF/MWCNT sensing elements were selected for piezoelectric and piezoresistive strain measurements, respectively. These characteristic measurements were investigated under different loading frequencies in a simply supported beam experiment. The 3D force sensor was tested under dynamic excitation in the Z-direction and the X-direction. A Direct Piezoresistive/Piezoelectric fusion (DPPF) method was developed by fusing the piezoresistive and piezoelectric measurements at a given frequency that overcomes the limited frequency ranges of each of the strain sensor characteristics. The DPPF method is based on a fuzzy inference system (FIS) which is constructed and tuned using the subtractive clustering technique. Different nonlinear Hammerstein-Wiener (nlhw) models were used to estimate the actual strain from piezoresistive and piezoelectric measurements at the 3D force sensor. In addition, an Extended direct Piezoresistive/Piezoelectric fusion (EPPF) algorithm is introduced to enhance the DPPF method via performing the fusion in a range of frequencies instead of a particular one. The DPPF and EPPF methods were implemented on the 3D force sensor data, and the developed fusion algorithms were tested on the new 3D force sensor via experimental data. The simulation results show that the proposed fusion methods have been effective in achieving lower Root Mean Square Error (RMSE) in the estimated strain than those obtained from the tuned nlhw models at different operating frequencies.

Research on 1-3 Orthogonal Anisotropic Piezoelectric Composite Material Sensors

Design and study on a 1–3 anisotropy piezocomposite sensor

A theory on anisotropic piezothermoelastic shell laminates with sensor/actuator applications

Diagonal Piezoelectric Sensors on Cylindrical Shells

Spatially Filtered Multi-Field Responses of Piezothermoelastic Cylindrical Shell Composites

Precision Placement Analysis of a New Multi-DOF Piezoelectric End-Effector via Finite Elements

Dynamics and Control of Adaptive Nonlinear Piezothermoelastic Structures with Coupled Electric, Thermal and Mechanical Fields: A Finite Element Approach

Piezothermoelasticity and Precision Control of Piezoelectric Systems: Theory and Finite Element Analysis

Opto-Piezothermoelastic Constitutive Modeling of a New 2-D Photostrictive Composite Plate Actuator

Piezoelectric fiber-composite-based cantilever sensor for electric-field-induced strain measurement in soft electroactive polymer

Direct and Extended Piezoresistive and Piezoelectric Strain Fusion for a Wide Band PVDF/MWCNT-Based 3D Force Sensor

Low-entropy structured wearable film sensor with piezoresistive-piezoelectric hybrid effect for 3D mechanical signal screening

Design, Fabrication, Structure Optimization and Pressure Sensing Demonstration of COC Piezoelectret Sensor and Sensor Array

Characterization of 0–3 piezoelectric polymer composites using FEA for biomedical transducers applications

Heterogeneous carbon/silicone composite for ultrasensitive anisotropic strain sensor with loading-direction-perception capability

Ultra-High Sensitivity Anisotropic Piezoelectric Sensors for Structural Health Monitoring and Robotic Perception

Numerical framework for anisotropic flexible piezoelectrics with large deformation

Sprayed piezoresistive flexible composite coating sensor for measuring strain measurement in steel structures

Research on the electro‐elastic properties of the 2‐1‐3 (a revised version of 1‐3‐2) piezoelectric composite by finite element method

Cement-based piezoelectric composite sensor designed for charactering the three-dimensional stress state in concrete

Piezothermic Transduction of Functional Composite Materials