Abstract:The objectives of this work are, fundamentally, to understand hollow fiber membrane formation from an engineering aspect, to develop the governing equations to describe the velocity profile of nascent hollow fiber during formation in the air gap region, and to predict fiber dimension as a function of air-gap distance. We have derived the basic equations to relate the velocity profile of a nascent hollow fiber in the air-gap region as a function of gravity, mass transfer, surface tension, drag forces, spinning stress, and rheological parameters of spinning solutions. Two simplified equations were also derived to predict the inner and outer diameters of hollow fibers. To prove our hypotheses, hollow fiber membranes were spun from 20 : 80 polybezimidazole/polyetherimide dopes with 25.6 wt % solid in N,N-dimethylacetamide using water as the external and internal coagulants. We found that inner and outer diameters of as-spun fibers are in agreement with our prediction. The effects of air-gap distance or spin-line stress on nascent fiber morphology, gas performance, and mechanical and thermal properties can be qualitatively explained by our mathematical equations. In short, the spin-line stresses have positive or negative effects on membrane formation and separation performance. A high elongational stress may pull molecular chains or phase separated domains apart in the early stage of phase separation and create porosity, whereas a medium stress may induce molecular orientation and reduce membrane porosity or free volume. Scanning electron microscopic photographs, coefficient of thermal expansion, and gas selectivity data confirm these conclusions. T-g of dry-jet wet-spun fibers is lower than that of wet-spun fibers, and T-g decreases with an increase in air-gap distance possibly because of the reduction in free volume induced by gravity and elongational stress. (C) 1999 John Wiley & Sons, Inc.

Numerical Simulation of a Mathematical Model for Dry/Wet-Spun Nascent Hollow Fiber Membrane

Numerical Simulation of a Mathematical Model for Dry/wet-Spun Nasceni Hollow Fiber Membrane

Mass Transfer Enhancement in Non‐dispersive Solvent Extraction with Helical Hollow Fiber Enabling Dean Vortices

Experimental And Numerical Analyses On The Poly(Lactide-Co-Glycolide) Hollow Fiber Membranes

Modeling of the Variations of Permeate Flux, Concentration Polarization, and Solute Rejection in Nanofiltration System

Numerical Study and Scale Analysis of Inner and Outer Diameters Prediction in Fabrication of Hollow Fiber Membranes for Nerve Regeneration

Fundamental Understanding of the Effect of Air-Gap Distance on the Fabrication of Hollow Fiber Membranes

An experimental and modeling investigation of the behaviors of solution in fluoropolymers hollow fiber membranes (HFMs)

Numerical simulation on velocities of two interacting fibers in fiber suspension

Two‐dimensional Simulation of Hollow Fiber Membrane Fabricated by Phase Inversion Method

Numerical Simulation of the Melt Spinning Process of Noncircular Fibers Incorporating Surface Tension

Differential Model of Benzene Absorption in A Hollow Fiber Membrane Contactor by N-Formylmorpholine

Modeling mass transfer using surface morphology in full-scale reverse osmosis membrane processes

Numerical Simulation of the Water Vapor Separation of a Moisture-Selective Hollow-Fiber Membrane for the Application in Wood Drying Processes

The Role of Nonsolvent In-Diffusion Velocity in Determining Polymeric Membrane Morphology

A novel theoretical model for mass transfer of hollow fiber hemodialyzers

Analytical Modelling of Dry-Jet Wet Spinning

Simulations of solute concentration profile and mass transfer behavior near the membrane surface with finite volume method

Model Simulation of Solvent Profile in the Preparation of PVDF Membrane and the Mechanism of Macrovoid Formation

Numerical Simulation of Mass Transfer in Hollow Fiber Membrane Module for Membrane-Based Artificial Organs

Investigation on Drag Reduction Characteristics and Shell‐Side Hydrodynamics in Hollow Fiber Membrane Modules