Abstract:In bridge structure monitoring and evaluation, deformation data serve as a crucial basis for assessing structural conditions. Different from discrete monitoring points, spatially continuous deformation modes provide a comprehensive understanding of deformation and potential information. Terrestrial laser scanning (TLS) is a three-dimensional deformation monitoring technique that has gained wide attention in recent years, demonstrating its potential in capturing structural deformation models. In this study, a TLS-based bridge deformation mode monitoring method is proposed, and a deformation mode calculation method combining sliding windows and surface fitting is developed, which is called the SWSF method for short. On the basis of the general characteristics of bridge structures, a deformation error model is established for the SWSF method, with a detailed quantitative analysis of each error component. The analysis results show that the deformation monitoring error of the SWSF method consists of four parts, which are related to the selection of the fitting function, the density of point clouds, the noise of point clouds, and the registration accuracy of point clouds. The error caused by point cloud noise is the main error component. Under the condition that the noise level of point clouds is determined, the calculation error of the SWSF method can be significantly reduced by increasing the number of points of point clouds in the sliding window. Then, deformation testing experiments were conducted under different measurement distances, proving that the proposed SWSF method can achieve a deformation monitoring accuracy of up to 0.1 mm. Finally, the proposed deformation mode monitoring method based on TLS and SWSF was tested on a railway bridge with a span of 65 m. The test results showed that in comparison with the commonly used total station method, the proposed method does not require any preset reflective markers, thereby improving the deformation monitoring accuracy from millimeter level to submillimeter level and transforming the discrete measurement point data form into spatially continuous deformation modes. Overall, this study introduces a new method for accurate deformation monitoring of bridges, demonstrating the significant potential for its application in health monitoring and damage diagnosis of bridge structures.

Analysis of Adaptive Kalman Filtering in Deformation Monitoring of Bridges

FE-based Bridge Weigh-in-motion Based on an Adaptive Augmented Kalman Filter

Sensor Placement of Long-Term Health Monitoring for Large Bridges Based on the Real-Time Correction of Finite Element Model

Dynamic Monitoring and Data Analysis of a Long-Span Arch Bridge Based on High-Rate GNSS-RTK Measurement Combining CF-CEEMD Method

Kalman Filter Based Estimation of Neutral Axis Position of Bridge Deck under Traffic Loading

Application of Adaptive Neuro-Fuzzy Inference System in Bridge Condition State Evaluation

A Kalman Filter-Based Method for Diagnosing the Structural Condition of Medium- and Small-Span Beam Bridges during Brief Traffic Interruptions

Dynamic displacement estimation and modal analysis of long-span bridges integrating multi-GNSS and acceleration measurements

Strain-Based Structural Condition Assessment of an Instrumented Arch Bridge Using Fbg Monitoring Data

Structural damage detection based on Kalman filter and neutral axis location

Wavelet De-Noising with Improved Threshold Method for Bridge Health Monitoring

Bridge finite element model updating using stochastic vehicle-induced static response monitoring data

Finite element model updating method for continuous girder bridges using monitoring responses and traffic videos

Robust adaptive Kalman filter for structural performance assessment

Application of Bayesian Update Method in the Construction Control of Continuous Rigid Frame Bridge Girders with High Piers and Large Spans

Examination of load-deformation characteristics of long-span bridges in harsh natural environments based on real-time updating artificial neural network

Analysis of structural responses of bridges based on long-term structural health monitoring

Bridge Dynamic Displacement Monitoring Using Adaptive Data Fusion of GNSS and Accelerometer Measurements

High-Precision Monitoring Method for Bridge Deformation Measurement and Error analysis Based on Terrestrial Laser Scanning

Extended Kalman filter algorithm for non-roughness and moving damage identification

A hierarchical Bayesian model updating method for bridge structures by fusing multi-source information