Abstract:Shake table test is one of the most important manners for the performance evaluation of structures under strong earthquakes and for the verification of refined numerical simulation methods. To this end, in the present paper, shake table tests on two concrete shear wall model structures, together with the tests of complete uniaxial compressive constitutive curves of concrete, were carried out. The purpose of the tests is to provide quantitative benchmark results for the verification and improvement of refined multi-scale numerical simulation method for structures exhibiting strong non-linear behaviors. Three important properties were carefully taken into account in the tests, including: (1) The scale ratio should not be too small so that detailed local damage could be revealed and the experimental results could serve as benchmark data; (2) The model structures should exhibit strong nonlinear behaviors but the accumulated damage between load cases should be avoided; (3) Concrete specimens should be simultaneously tested to capture the complete stress-strain curves rather than only the two parameters (the compressive strength and Young's modulus); and (4) The unavoidable randomness involved in concrete structures should be quantified. To satisfy the above requirements, some special measures were taken, including: e.g., vertical prestressed tendons were exerted to make up the inadequacy of gravitational compression due to the inadequate density scaling; strong earthquake inputs were input directly after linear stage tests so that strong non-linearity occurred directly in the model structures, similar to practical structures subjected to real earthquakes; and 54 concrete specimens were tested for constitutive law and two model structures were tested for comparison and characterizing the effects of randomness. The experimental results, including frequencies and vibrational modes, the observed damage distributions and the responses of model structures are elaborately delineated and discussed in the paper. In particular, besides flexural-shear damage, compressive damage was also observed in the test model structures. This is frequently observed in practical earthquake damage but is usually not exhibited in most shake table tests. Such detailed information together with observed data provided valuable benchmark data for the verification and improvement of refined numerical simulation method, which will be detailed in other papers.

Study on shaking table test of precast concrete shear wall structure

Seismic performance of precast concrete shear wall structure with improved assembly horizontal wall connections

Study on the global bidirectional seismic behavior of monolithic prefabricate concrete shear wall structure

Shaking table test of fabricated concrete shear wall structure and study on damage mechanism of strong earthquake

Experimental Study on Seismic Behavior of Precast Concrete Sandwich Shear Walls under High Axial Compression Ratio

Seismic Performance of Base-Isolated Precast Concrete Shear Wall Structure with AHW Connections

Experimental Investigation on Seismic Performance of Precast Concrete Frame-shear Wall Structures Comprised of Cast-in-place Concrete Shear Walls

Mechanical Behavior of Precast Building Concrete Walls with Different Connection Technologies for Seismic Areas

Seismic behavior of a new type of precast concrete shear wall using UHPC connections at boundary elements

Shake-table Testing of a Self-Centering Precast Reinforced Concrete Frame with Shear Walls

Seismic performance of a new type of precast shear walls with non-connected vertical distributed reinforcement

A Shake Table Test Study of Reinforced Concrete Shear Wall Model Structures Exhibiting Strong Non-Linear Behaviors

Experimental and Numerical Study on Seismic Performance of Precast Concrete Hollow Shear Walls

Experimental Study on Seismic Performance of Full Precast Shear Wall-Frame Structures

Shaking table test and numerical simulation of a superimposed reinforced concrete shear wall structure

An experimental study of the seismic behaviour of precast concrete shear walls with bolted-plate connections

Experimental study on seismic behavior of wholly precast RC frame-shear wall structure

Shaking table tests and seismic assessment of a full-scale precast concrete sandwich wall panel structure with bolt connections

Seismic behavior of precast composite shear walls with concealed bracings and new type vertical connections

Quasi-static Test of Precast Reinforced Concrete Shear Wall Structure

Experimental investigation of seismic performance of precast concrete shear walls with overlapping U-bar loop connections