Abstract:In recent years, various biodiesels have been developed to decrease pollutant emissions from compression ignition engine. However, the current research focuses on reducing the pollutant components without considering the mechanical vibration that occurred due to the changes in fuel properties such as viscosity, calorific values, density, and bulk modulus. It is important to explore the relationships between fuel properties and engine vibration. Mechanical vibration could cause power loss and affect the lifetime of the engine. In this investigation, a lister-pitter 3-cylinder diesel engine was used to analyse the mechanical vibration of three different fuels including diesel, waste cooking oil biodiesel (WCOB), and lamb fat biodiesel (LFB). The high-frequency vibration sensors were mounted on the cylinder head to monitor and assess the vibration performance. The vibration data were collected under various operating conditions including varying engine speed from 1500 to 2000 rpm and varying engine loads ranging from 20% to 100%. Three practical assessment features of vibration signals were investigated to evaluate the vibration characteristics. The experimental results clearly demonstrate the relative relations between vibration, and fuel properties of the tested fuels, used in the diesel engine. Compared with fossil diesel fuel, the total vibration level decreased by 17% and 23% for WCOB and LFB fuels, respectively. The engine performance powered with LFB and WCOB are better than diesel’s effect on both vibration and friction power (FP) perspective. Superior lubricity and viscosity of WCOB and LFB is the main reason causing good vibration performance.

Influence Law of Vibration Sources of Diesel Engine Based on the Sensitivity Analysis of IMFs

A General Approach to Tune the Vibration Properties of the Mounting System in the High-Speed and Heavy-Duty Engine

Extraction of Diesel Combustion Signal in the Cylinder

EMD Method on Identifying Natural Frequency and Damping Ratio of Vibration Mode

The Holistic Finite Element Model Analysis of Diesel Engine

Identification of Axial Vibration Excitation Source in Vehicle Engine Crankshafts Using an Auto-regressive and Moving Average Model

Influence of multi-body dynamics modeling method on simulation of engine main bearing force

Analysis of Engine Vibration and Design of an Applicable Diagnosing Approach

Simplified model for vibration analysis of diesel engine crankshaft system

Study on the Relationship between Combustion Parameters and Cylinder Head Vibration Signal in Time Domain

Axial vibration source identification of engine crankshaft based on auto-regressive and moving average model and analytic hierarchy process method

Vibration Analysis of an Engine Cylinder Block

Torsional Vibration Analysis Based on Multi-body Dynamics of Flexible Crankshaft System

Experimental Investigation Using Laser Vibrometer and Finite Element Modeling for Modal Analysis of Camshaft

Data-driven Approach for Condition Assessment of a Diesel Engine Powered with Various Biodiesels

Adaptive time-domain impact extraction method for multi-source impact vibration signal of diesel engine

Separation of piston-slap and combustion shock excitations via MEEMD method

Study on diagnosis method of fuel cut-off fault of diesel engine fuel supply system

Investigation on Axial Vibration of Crankshaft Based on Rayleigh Differential Method

Diagnosis of Valve-Slap of Diesel Engine with EEMD-EMD-AGST Approach

A Vibration Analysis for the Evaluation of Fuel Rail Pressure and Mass Air Flow Sensors on a Diesel Engine: Strategies for Predictive Maintenance