Preparation of Phenolic Foam Plastics Based on Fast Paralytic Oil of Biomass

Jianzhao TANG,Teng RONG,Minzhi RONG,Mingqiu ZHANG
DOI: https://doi.org/10.13471/j.cnki.acta.snus.2014.04.044
2014-01-01
Abstract:Liquid bio-oil converted from renewable biomass is one of the important alternatives to petrole-um in the future .In this work , wood creosote with more than 85%enrichment phenolic compounds was obtained by extraction purification of the wood tar .The main ingredients of the creosote include guaiacol , para-cresol, etc., which have good reactivity with formaldehyde .Then, w=50% of the wood creosote was used to substitute phenol for manufacturing wood creosote modified phenolic foam .The optimum con-ditions for preparing A-stage phenolic resin were determined by orthogonal test .It was found that the a-mount of NaOH catalyst was a key factor of preparing A-stage phenolic resin , and the curing of the foam plastics needed to use sulfuric acid as the catalyst .The foams'mechanical properties could be tailored by using different foaming processes .The amount of curing agent , foaming agents and foaming time and tem-perature exerted great influence on the foams properties .Under optimum conditions , a kind of foam with cell diameter of 200μm, compressive strength of 1 003.8 kPa and modulus of 25.37 MPa was obtained , which satisfied the requirement of phenolic foam plastics of national standards .
What problem does this paper attempt to address?