Abstract:The computational analysis method of a hybrid structure composed of cables, bars and beams and its preliminary mechanical properties are presented in this paper. At first, based on the local analysis method, the distribution and magnitude of pre-stress of this hybrid structure is analysed using the optimal theory. Then, the optimal pre-stress distribution is obtained. The outmost ring of cable and bar has the largest pre-stress compared with the middle one and the inner one. Second, nonlinear static analysis is carried out with induction of the pre-stress in beams as self-equilibrated initial internal force. The tensegric system and pre-stress in the whole structure could not reduce the deflection dramatically. However, the pre-stress can significantly affects the distribution of the axial forces in beams. Also, linear and nonlinear dynamic analysis is conducted by taking account of the pre-stress of beams as self-equilibrated initial internal force. With the decrease of the stiffness of the upper reticulated structure the effect of pre-stress on natural frequencies of the whole structure becomes larger. The fluctuation of the internal force in the cables and bars is not very large under vertical frequently meeting earthquake load (not over 7%) and smaller under horizontal frequently meeting earthquake load. At last, buckling analysis is carried out. Comparing to single-layer reticulated shell, this type of hybrid structures has much higher limit load capacity ability.

Study on Frame Pier with Prestressed Cable

Analytical Calculation Method of Seismic Resistant Response for Posttensioned Precast Bridge Piers

Study on the Interval of Pre-Stressed Anchor Cables and Cantilever Length of Frame Beams in Reinforcing Slopes

Study on Typical Dynamic Characteristics of a Long-span Prestressed Concrete Cable-stayed Bridge

Mechanical Analysis of a Type of Hybrid Spatial Structure Composed of Cables, Bars and Beams

Research on Spatial Effect of Prestressing Force in Long-Span Concrete Bridge

SCHEME COMPARATION OF STRENGTHENING CONTINUOUS PRESTRESSED CONCRETE BOX GIRDER BRIDGE BY EXTERNAL PRESTRESSED CABLE

Simulation of cantilever-casting construction of prestressed concrete cable-stayed bridge

Spatial Simulating Analysis Of Prestressing Force Effect Of Long Span Prestressed Concrete Box Girder Bridge

Surface compress effects of crush rock slope under prestressed cables anchorage forces

Internal Force Calculation and Stability Analysis of the Slope Reinforced by Pre-Stressed Anchor Cables and Frame Beams

Seismic Analysis of Long Span Continuous Rigid-Frame Bridge with Thin-Walled High Piers

Caisson-Bored Pile Composite Anchorage Foundation for Long-Span Suspension Bridge: Feasibility Study and Parametric Analysis

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

Study on Static and Dynamic Behavior of T-Frame Bridge Reinforced by External Tendons

Design and Analysis of Long-span Portal Frame Steel Structures with Prestressed Cable-strut

Effective length coefficient of pier of multi-span continuous rigid-frame bridge based on transfer matrix method with branch

STUDY ON THE RIGID FRAME BRIDGE STRENGTHENED BY EXTERNAL PRESTRESSING TENDONS AND ANCHOR BLOCKS

The study of mechanism of prestressed cables and its parameter optimization based on simulation

Full-Scale Segment Model Test and Performance Improvement Scheme of Cable-Pylon Anchorage Zone for Cable-Stayed Bridge

Study on Seismic Performance Optimization of Assembly Concrete-Filled Steel Tubular (CFST)-Laced Piers