Abstract:At present, cantilever structure used widely in civil structures will generate continuous vibration by external force due to their low damping characteristic, which leads to a serious impact on the working performance and service time. Therefore, it is very important to control the vibration of these structures. The active vibration control is the primary means of controlling the vibration with high precision and strong adaptive ability. Nowadays, there are many researches using piezoelectric materials in the structural vibration control. Piezoelectric materials are cheap, reliable and they can provide braking and sensing method harmless to the structure, therefore they have broad usage. They are used for structural vibration control in a lot of civil engineering research currently. In traditional sensor applications, information exchanges with the monitoring center or a computer system through wires. If wireless sensor networks(WSN) technology is used, cabling links is not needed, thus the cost of the whole system is greatly reduced.Based on the above advantages, a wireless control system is designed and validated through preliminary tests. The system consists of a cantilever, PVDF as sensor, signal conditioning circuit(SCM), A/D acquisition board, control arithmetic unit, D/A output board, power amplifier, piezoelectric bimorph as actuator. DSP chip is used as the control arithmetic unit and PD control algorithm is embedded in it. PVDF collects the parameters of vibration, sends them to the SCM after A/D conversion. SCM passes the data to the DSP through wireless technology, and DSP calculates and outputs the control values according to the control algorithm. The output signal is amplified by the power amplifier to drive the piezoelectric bimorph for vibration control. The structural vibration duration reduces to 1/4 of the uncontrolled case, which verifies the feasibility of the system.

Study and validation of cascade wireless predictive control algorithm for cantilever beam structure

Experimental study of wireless structural vibration control considering different time delays

Deflection Control of an Active Beam String Structure Using a Hybrid Genetic Algorithm and Back-Propagation Neural Network

Research on force control theory of adaptive beam sting structure

Design and Validation of a Wireless Distributed Control Experimental System on Three-Layer Spring Steel Structure Model

Latency-Aware Control for Wireless Cloud Fog Automation: Framework and Case Study

Predictive Control applied Queuing Strategy in Networked Control Systems

Active Structures Integrated with Wireless Sensor and Actuator Networks: a Bio-Inspired Control Framework

A Wireless Decentralized Control Experimental Platform for Vibration Control of Civil Structures

Design And Initial Validation Of A Wireless Control System Based On Wsn

Design and Implementation of a Wireless Optimal Control Scheme for Active Structural Vibration Control

Wide-area Damping Control Considering Multiple Delays of Feedback Signals

Modelling and Control of Zigbee-based Wireless Networked Control System with Both Network-Induced Delay and Packet Dropout

Wide-area damping control reckoning with feedback signals’ multiple delays

Wireless Sensing and Vibration Control With Increased Redundancy and Robustness Design

Fast-transient repetitive controller based current control strategy for a cascaded DSTATCOM

Modeling and Stabilization of a Wireless Network Control System with Packet Loss and Time Delay

Cantilever-casting Control of Prestressed Concrete Cable-Stayed Bridge

Delay-dependent Controller Design for Networked Control Systems with Long Time Delays: an Iterative LMI Method

Dynamic Deadband Event-Triggered Strategy for Distributed Adaptive Consensus Control with Applications to Circuit Systems

Research and Simulation of Wireless Sensor and Actuator Networked Control System