Abstract:At present, cantilever structure used widely in civil structures will generate continuous vibration by external force due to their low damping characteristic, which leads to a serious impact on the working performance and service time. Therefore, it is very important to control the vibration of these structures. The active vibration control is the primary means of controlling the vibration with high precision and strong adaptive ability. Nowadays, there are many researches using piezoelectric materials in the structural vibration control. Piezoelectric materials are cheap, reliable and they can provide braking and sensing method harmless to the structure, therefore they have broad usage. They are used for structural vibration control in a lot of civil engineering research currently. In traditional sensor applications, information exchanges with the monitoring center or a computer system through wires. If wireless sensor networks(WSN) technology is used, cabling links is not needed, thus the cost of the whole system is greatly reduced.Based on the above advantages, a wireless control system is designed and validated through preliminary tests. The system consists of a cantilever, PVDF as sensor, signal conditioning circuit(SCM), A/D acquisition board, control arithmetic unit, D/A output board, power amplifier, piezoelectric bimorph as actuator. DSP chip is used as the control arithmetic unit and PD control algorithm is embedded in it. PVDF collects the parameters of vibration, sends them to the SCM after A/D conversion. SCM passes the data to the DSP through wireless technology, and DSP calculates and outputs the control values according to the control algorithm. The output signal is amplified by the power amplifier to drive the piezoelectric bimorph for vibration control. The structural vibration duration reduces to 1/4 of the uncontrolled case, which verifies the feasibility of the system.

Design and Validation of a Wireless Distributed Control Experimental System on Three-Layer Spring Steel Structure Model

A Wireless Decentralized Control Experimental Platform for Vibration Control of Civil Structures

Design And Initial Validation Of A Wireless Control System Based On Wsn

Design and Implementation of a Wireless Optimal Control Scheme for Active Structural Vibration Control

Wireless Sensing and Vibration Control With Increased Redundancy and Robustness Design

Design And Testing Of A Wireless Strain Sensor Toward Large-Span Spatial Structures

Study and validation of cascade wireless predictive control algorithm for cantilever beam structure

Interactive Control System of Variable Force Feedback Robot Based on Spring Model

Experimental study of wireless structural vibration control considering different time delays

Distributed Structural Dynamics Control of Flexible Manipulators—ii. Distributed Sensor and Active Electromechanical Actuator

Design and Validation of Wireless Dynamic Testing System for Bridge Based on the 941B Type Vibration Sensor

Experimental Studies Of Amd Vibration Control Using A Fuzzy Controller

The hierarchical decentralized fault tolerate control for building structure experiment research

Dynamic modeling and control for a three-dimensional vibration isolation system with a 3-RPC parallel mechanism

Intelligent control and simulation analysis for vibration reduction of nonlinear structure

Active Vibration Control of a High-Speed Flexible Robot Using Variable Structure Control

Simulation and Experimental Research on Flexible Structure Vibration Control Based on Electromagnetic Actuator

Design and Implementation of Wireless Identification and Sensing Platform in Structure Monitoring

Vibration IOT Control Algorithm for Steel Structures of Concrete Buildings with Elastic Boundary Constraints

Study on Active Control of Structural Frequency Response

Control Strategies and Experimental Verifications of the Electromagnetic Mass Damper System for Structural Vibration Control