Abstract:In the ductile design, it is an essential task to accurately estimate the equivalent plastic hinge length of a reinforced concrete (RC) column. The plastic behavior of a RC hollow column is influenced significantly by tension shift and bond-slip according to the test results, which hasn't yet received adequate attention in the existing models of equivalent plastic hinge in the literatures. Few publications and even no explicit provision in the current codes provide the method to compute the plastic hinge of hollow RC columns, especially those with a variable section. To bridge this knowledge gap, in this study, based on the equivalent principle of plastic displacement, an innovative formula of equivalent plastic hinge length is derived for the hollow columns, which considers both the effects of plastic tension shift and bond-slip based upon the authors' previous research on solid columns. The quasi-static tests on two rectangular and two round-ended hollow columns were conducted to calibrate the undetermined parameters of the proposed formula. The accuracy and applicability of the proposed formula were then investigated based on the available test results of 30 rectangular and 3 round-ended hollow columns in literature. The results show that different slip behavior leads to distinct plastic deformation between these two types of hollow columns. Compared to the rectangular columns with a uniform section, the plastic hinge length of round-ended columns is longer due to the presence of the bottom solid segment, chamfer, and variable section. For both types of hollow columns, the equivalent plastic hinge region increases with the specimen length, section height, and strain penetration. The comparison suggests that the proposed formula is more appropriate to calculate the plastic hinge length of hollow columns with a uniform or variable section than the existing models.

Study of evaluation of equivalent plastic hinge length of reinforced concrete columns

Numerical simulation and experimental analysis of plastic hinge length of reinforced concrete columns under monotonic flexure and constant axial load

Experimental investigation on plastic hinge length of RC round-ended hollow columns with a variable section

Seismic Behavior of Wide-Flange Steel Column with Confined Potential Plastic Hinge

Numerical Investigation on Plastic Hinge Length of Ultra-high Performance Concrete Column under Cyclic Load

Prediction of the plastic hinge length for square CFST stocky columns

Plastic Hinge Capacity Prediction for Existing RC Rectangular Columns to Load Reversals

Plastic hinge length in reinforced HPFRCC beams and columns

Evaluation of the seismic performance of reinforced concrete bridge columns based on plastic hinge model

Plastic hinge analysis of FRP confined circular concrete columns

Analysis Method for Nonlinear Properties of Reinforced Concrete Columns

Plastic Hinge Length of FRP-Confined Square RC Columns

Plastic Hinge Regions of Prefabricated Concrete Columns with Grouted Sleeves and Simplified Calculation Method for Plastic Hinge Length

A Simplified Plastoelastic Analysis of Reinforced Concrete Columns Subjected to Biaxial Bending

Experimental investigation of concrete-filled steel tubular columns with reinforcing lattice angle

Parameter optimization for Pivot hysteresis model for reinforced concrete columns with different failure modes

Analysis of Load-deformation of Reinforced Concrete Columns Based on Simplified Modified Compression Field Theory

Plastic Hinge Length for Flanged Reinforced Concrete Shear Walls with Asymmetric Sections

Ductility and Moment Redistribution of Reinforced Concrete Flexural Members

Load-deformation Relations of Reinforced Concrete Columns Under Flexural-shear Failure

Development Mechanism Of Plastic Hinge In Reinforced Engineered Cementitious Composite Beams Under Monotonic Loading