Abstract:Bio-oil contained a large number of macromolecular compounds like asphalt, which made it difficult to obtain accurate results from direct test analysis. In this study, hydrothermal liquefaction (HTL) bio-oil of Spirulina (300 °C, 30 min, 10 MPa) was underwent column chromatography separation (CCS) process to retain the macromolecular substances in the column, which improved the accuracy of subsequent analysis results. The obtained fractions were characterized by Thermo-Gravimetric Analysis (TG), Gas Chromatography-Mass Spectrometry (GC-MS) analysis, Elemental Analysis, and Fourier Transform Infrared (FT-IR) Spectroscopy Analysis. TG analysis showed that a significant amount of components coexisting in high-boiling-range residue in bio-oil could be isolated into quasi-gasoline and quasi-kerosene species, so the low boiling-point fractions of bio-oil between 30-250 °C increased. GC-MS proved that CCS could effectively separate bio-oil and the number of detected components in bio-oil increased from 25 to 109 after CCS. The results of elemental analysis and FT-IR indicated that the components of the bio-oil were separated according to the polarity , and the higher heating values(HHVs) of each distillate oil (38.32-42.19 MJ kg−1) was significantly higher than the bio-oil before CCS (31.83-36.04 MJ kg−1). Comprehensive results of multiple analysis could help determine the market application prospects of bio-oil. In addition, tert-hexadecanethiol was studied as a representative Sulphur-compound to surmise its generation mechanism. The speculation of the conversion pathway of sulphur (S) element could provide a basis for a better understanding of the HTL reaction mechanism.

Solvent Extraction-Column Chromatographic Separation of Bio-Oil from Fast Pyrolysis of Apricot Stone and Manufacture Technology

EXPERIMENTAL RESEARCH ON CORNCOB FAST PYROLYSIS FOR BIO-OIL IN A FLUIDIZED BED REACTOR

Selective Extraction of Bio-oil from Hydrothermal Liquefaction of Salix psammophila by Organic Solvents with Different Polarities through Multistep Extraction Separation

Separation and Enrichment of Catechol and Sugars from Bio-oil Aqueous Phase

Pyrolysis Characteristics of Bio-Oil Fractions Separated by Molecular Distillation

Multi-step separation of monophenols and pyrolytic lignins from the water-insoluble phase of bio-oil

Character and Composition Analysis of Distilling Fractions from Sewage Sludge Pyrolysis Oil

Multi-step Separation of Different Chemical Groups from the Heavy Fraction in Biomass Fast Pyrolysis Oil

Separation of Acid Compounds for Refining Biomass Pyrolysis Oil

Characterization of column chromatography separated bio-oil obtained from hydrothermal liquefaction of Spirulina

Properties of Bio-oil from Fast Pyrolysis of Rice Husk

Further separation, characterization, and upgrading for upper and bottom layers from phase separation of biomass pyrolysis oils

Separation of High-Purity Syringol and Acetosyringone from Rice Straw-Derived Bio-Oil by Combining the Basification-Acidification Process and Column Chromatography

Experimental Study of the Effect of Spray Medium on the Collection of Bio-Oil Produced from Biomass Fast Pyrolysis

Separation of bio-oil by molecular distillation

Optimizing invasive plant biomass valorization: Deep eutectic solvents pre-treatment coupled with ZSM-5 catalyzed fast pyrolysis for superior bio-oil quality

Separation and Characterization of Pyrolytic Lignins from the Heavy Fraction of Bio-Oil by Molecular Distillation

Esterification, Distillation, and Chemical Characterization of Bio-Oil and Its Fractions

Preparation of bio-oil enriched with phenolic compounds by combining acid-washing pretreatment and condensation technology

Effective Phase Separation of Biomass Pyrolysis Oils by Adding Aqueous Salt Solutions

Separation characteristics of biomass pyrolysis oil in molecular distillation