Separation characteristics of biomass pyrolysis oil in molecular distillation

Zuogang Guo,Shurong Wang,Yueling Gu,Guohui Xu,Xin Li,Zhongyang Luo

DOI: https://doi.org/10.1016/j.seppur.2010.09.019

IF: 8.6

2010-01-01

Separation and Purification Technology

Abstract:In order to enhance the condensation efficiency during molecular distillation experiment, crude bio-oil was subjected to pretreatment consisting of traditional vacuum distillation. Most of the water in the crude bio-oil was removed first, and then this was used as the feed bio-oil for two molecular distillation processes. Four fractions were obtained under the operation parameters of 80°C, 1600Pa and 80°C, 340Pa. The yields of distilled fractions 1 and 2 were 26.36% (w/w) and 22.58% (w/w), respectively. The distilled fractions were rich in low molecular weight carboxylic acids and ketones, so they had better flow ability than the residual fractions. The water in the residual fractions was almost completely removed and the heating values of residual fractions 1 and 2 reached 21.29MJ/kg and 22.34MJ/kg. The integrated separation characteristic of bio-oil was explored by a macro-level evaluation model. It based on the distribution properties of functional groups and gave information that carboxylic acids, ketones and furans had better distillation characteristics than aldehydes, phenols and sugars. A self-defined separation factor β was used in the micro-level evaluation model to specify the separation characteristics of 15 typical compounds. It indicated that acetic acid and 2-propanone, 1-hydroxy had a high separation factor of 0.9 while 5-hydroxymethyl, furaldehyde and 1,2-benzenediol had a separation factor as low as 0.04.