Abstract:Wet friction clutch is the key functional component of the high-speed helicopter variable-speed transmission system, which is used to change the power transmission path. In the engagement process of wet friction clutch, the driving/driven disc will produce drag torque under the shearing of lubricating oil, which reduces the transmission efficiency. This unnecessary drag torque reduces efficiency and increases clutch temperature. The temperature increase promotes the wear of gears and bearings and the aging deformation of friction plates, which leads to local wear and reduces the service life of the clutch. From the principle of wet friction clutch, the oil groove structure is directly related to the drag torque and the temperature rise of friction disc. It is very important for the long-distance flight and service life of high-speed helicopters to obtain the groove structure with low drag torque and low temperature rise. In order to solve this problem, taking the wet friction clutch of a high-speed helicopter as the research object, based on the radial and annular compound groove, the thermal-fluid-solid coupling simulation model of the wet friction clutch is established to obtained the flow characteristics and temperature field distribution of the lubricating oil in the friction disc oil groove, and to analyze the influence law of the oil groove structure parameters on the drag torque and temperature field. In order to improve the transmission efficiency and the service life of friction disc, Taguchi experiment and non-dominated neighborhood immune algorithm were used to optimize the structural parameters of the oil grooves. The comparison results show that the optimized structural can effectively reduce the drag torque and the temperature rise. This work can provide a theoretical reference for the structure design of a wet friction clutch.

Towing Torque Prediction and Influence Factor Analysis of Wet Friction Clutch

Parametric Analysis of the Drag Torque Model of Wet Multi-Plate Friction Clutch with Groove Consideration

Experimental and Theoretical Analysis of the Drag Torque in Wet Clutches

Numerical and Experimental Research on Engagement Process of Wet Multi-Plate Friction Clutches with Groove Consideration

Simulation Research on the Drag Torque of Disengaged Wet Clutches

Simulation and Experiment on Dynamic Engagement Characteristics of Wet Clutch

Drag torque prediction model of wet multi-disk shifting clutch

Analysis of Clutch Engagement Judder and Its Influence Factors

Design and characteristic of lubricating oil chamber of hydro-viscous drive clutch

Application of Fractal Features in Prediction of the Wet Clutch Wear-in State

Simulation Analysis for Lubrication State of the Thrust Washer Within Straight Planetary Gear Set

Modeling of the Drag Torque of the Disengaged Grooved Wet Clutches with Waviness

Analysis on the oil film uniformity of hydro-viscous drive friction pairs

Calculation and analysis of wet clutch sliding torque based on fluid-solid coupling dynamic behavior

Analytical simulation of influential parameters affecting grooved wet clutches performance underdisengagement condition

Nonlinear Dynamic Characteristics of Rub-Impact Process at High Circumferential Velocities in No-Load Multiplate Wet Clutch

Study on dynamic characteristics variation mechanism of wet-clutches during the filling phase considering temperature and rotational speed of the oil

Analysis and Revision of Torque Formula for Hydro-viscous Clutch

Control-oriented modeling of wet clutch friction considering thermal dynamics

Temperature Analysis of Wet Clutch' Friction Pair Considering Axial Pressure Attenuation Effect

Thermal-Fluid-Solid Coupling Simulation and Oil Groove Structure Optimization of Wet Friction Clutch for High-Speed Helicopter