Abstract:It is difficult to control a surface wetting due to the random surface texture, but its fabrication is easy. Hence, the volume ratio is proposed through the 3D characterization of micro-structured surface in contrast to traditional roughness factor, fractal dimension and aspect ratio through 2D characterization. The objective is to investigate the wetting properties related to the characterization of irregularly microstructured surface. First, the irregularly micro-structured Si surfaces with 0.22-3.58 pin in depth were machined by the rubbing, the polishing and the grinding with different diamond abrasive grain size and random abrasive grain shape, respectively; secondly, the surface wetting properties were investigated with regard to the characterized parameters of measured micro-topographic surfaces; finally, the irregular wetting model was constructed by using volume ratio on the base of non-composite wetting. It is shown that the contact angle increases with increasing roughness factor and aspect ratio and decreasing fractal dimension on the irregularly micro-structured surfaces, but it is different from the prediction of non-composite wetting model. Moreover, the irregularly micro-structured surfaces without anisotropic properties produce smaller contact angles than regularly micro-structured surfaces with anisotropic properties. The experimental results show that an increase in volume ratio leads to a decrease in contact angle. It is identical to the predictions of the proposed model. This is because the volume ratio precisely illustrates 3D contact information between the liquid and solid interfaces. It is confirmed that the volume ratio may be utilized to predict and control the wetting of irregularly micro-structured surface. (C) 2015 Elsevier B.V. All rights reserved.

Analysis and Characterization of Micro-Topography of Paper Surface Base on AFM

Fractal Description of Surface Topography of Ultrathin Au Films

A Study on 3D Micro-Topographical Measurement of FRCMC Grinding Surface

Characterization of Engineering Ceramics Ground Surface Based on Fractal Theory

Fractal characterization of mechanical surfaces

New advances in the 3D characterization of mineral coating layers on paper.

Micro- and Nano-Roughness Separation Based on Fractal Analysis

Relationship analysis of surface roughness measurements on coatings using AFM and fractal dimension by mesoscopic model methods

Fractal Dimension Characterization for Surface Microtopography of Copper Cut by Single Point Diamond Tool

Characterization of Irregularly Micro-Structured Surfaces Related to Their Wetting Properties

Fractal Characterization of Nano Anisotropic Rough Surface

Influences of Planarization Modification and Morphological Filtering by AFM Probe-Tip on the Evaluation Accuracy of Fractal Dimension

Estimation Method of Ideal Fractal Parameters for Multi-Scale Measurement of Polished Surface Topography

Measurement of Sub-Surface Microstructures Based on a Developed Ultrasonic Atomic Force Microscopy

Research into the Application of Fractal Geometry in Characterising Machined Surfaces

Fractal Dimension Characterization on Surface Microtopography of Ultra-precision Machined Oxygen-free Copper

Simulation and analysis of micro-textured rough curved surface based on fractal characterization method

Fractal Analysis on Surface Topography of Thin Films: A Review

Study on Optical Surface Roughness with Multi-fractal Spectrum

Analysis of Fractal of Micro-Structure Curve of Coarse Aggregate and Contrast Between Different Dimension Algorithms

Fractal Analysis on Topography of KDP Surfaces by Single Point Diamond Tools Method