Abstract:In the paper ,the complex permittivity of discontinuous films was calculated using Bruggeman effective medium theory (EM T ) ,moreover ,an S parameter retrieved method based on HFSS software and a cavity perturbation method were also used for comparison to verify the EMT results .The calculation results indicate that the effective permittivity of discontinuous films can be analytically calculated using Bruggeman effective medium theory when the condition of long wave approximation is met ,which gives a convenient routine to get the permittivity of discontinuous films .The metal permittivity based on Drude equation has been renormalized to be used in Bruggeman theory ,and the renormalized metal permittivity effectively reflects the influence of eddy effect and enhanced effect of local electric field ,so that the metal unit can be considered as a homogenously polarized medium in the discontinuous films .Due to eddy effect ,the size of metal unit would remarkably influence the effective permittivity of discontinuous films ,which means that the larger unit size will result in the higher renormalized metal permittivity .The effective permittivity could be tuned by controlling the metal unit size in the discontinuous metal films .Additionally ,another key result is that the Bruggeman theory is effective only when the metal unit concentration is below the percolation threshold ,because the effective medium theory is based on the assumption that the fields are the same in all metal units ,which is the base to renormalize metal permittivity .This assumption does not hold when a metal concentration approaches the percolation threshold because the multipole scattering will take effect .All the results concluded in the paper give a rule to use EM T to handle the discontinuous metal films ,and are very valuable in studying their dielectric properties .

Calculations of dielectric properties of discontinuous metal films

MIXTURE EFFECTIVE PERMITTIVITY SIMULATIONS USING IMLMQRF METHOD ON PRECONDITIONED EFIE

DISCONTINUOUS BIFURCATIONS OF METALLIC MATERIALS FOR PLANE STRESS

Study on the property of subwavelength imaging in a metal thin-film structure

An Area-Averaged Conformal Technique for the Electromagnetic Simulations of Debye Medium

Conductivity Measurements of A Metallic Diffuse-Fringe Film Percolation System

Extension of effective permittivity for metallic elements on the substrates interface

A universal approach of modelling the dielectric behaviors of percolative composite ceramics and thin films

A new perturbation method for determining the broadband complex permeability of magnetic thin films

Measurement for complex permittivity and complex permeability of film

Effective Dielectric Response of Composites with Graded Material

Research on dielectric manipulation of metal films

Critical Behavior of a Metallic Diffuse-Fringe Film Percolation System

1st-Principles Fourier Approach For The Calculation Of The Effective Dielectric-Constant Of Periodic Composites

Semi-phenomenological Effective Permittivity Approach to Metallic Periodic Structures.

On Percolation and Circular Bragg Phenomenon in Metallic, Helicoidally Periodic, Sculptured Thin Films

An Improved Subdomain Level Nonconformal Discontinuous Galerkin Time Domain (DGTD) Method for Materials with Full-Tensor Constitutive Parameters

Discontinuous zone free element method with variable condensation and applications in thermal-stress analysis of functionally graded material structures with cracks

Enriched finite element approach for modeling discontinuous electric field in multi-material problems

The chemical potential and the work function of a metal film on a dielectric substrate

A Method to Determine Broadband Complex Permittivity of Thin Film Dielectric Materials up to 60 GHz