Abstract:Pavement structure bearing capacity is an important evaluation parameter in pavement design, construction, maintenance management, and reconstruction, and is generally expressed by the pavement deflection value. Some of the current road bearing capacity detection equipment have high detection accuracy, but the detection speed is slow, they cannot achieve real-time continuous detection; and some detection speeds are fast, but the measurement accuracy is easily affected by the pavement roughness and vehicle vibration. Moreover, the detection result is the pavement displacement, which cannot directly reflect the comprehensive modulus of the pavement structure. In this paper, firstly, a two-stage jump mechanical model of "machine-pavement" system is established in order to develop a device that can simulate the real driving load and continuously test the bearing capacity of pavement structure, and the main factors affecting the acceleration response of vibrating drums were determined through analysis. Then, a finite element model of the "machine-pavement" system was established to overcome the difficulty in obtaining the parameters such as vibrating weight, equivalent stiffness, and equivalent damping of pavement structure in numerical solution of dynamic model. Next, the mean value A of the maximum acceleration signal of the vibrating drum and the coefficient of variation acv of the maximum acceleration signal were selected as evaluation indicators to analyze the change trend of the maximum acceleration of the vibrating drum with the excitation frequency and excitation force under different composite modulus of pavement structures. Finally, the relationship between the composite modulus E of the pavement structure and the maximum acceleration A of the vibrating drum was obtained by simulating the pavement structure with the composite modulus ranging from 100 MPa to 2900 MPa, and the accuracy of this relationship was verified by field tests. The research showed that the acceleration signal of the vibrating drum had a good fitting relationship with the bearing capacity of the pavement structure when the testing device with the vibrating drum mass of 100 kg, the exciting frequency of 60 Hz, and the exciting force of 650 N jumped on the pavement structure, and the error was about 20% after comparing with the results of Benkelman beam testing, which basically met the engineering requirements. Therefore, the device can be used to continuously detect the bearing capacity of pavement structures.

Analysis of Structural Dynamic Characteristics Based on Vibration Environment Prediction

Structural Analysis of Agricultural Truck Frame Based on the Finite Element Method

A Method to Predict Structural Dynamic Strain Based on Acceleration Signal

Noncontact structural dynamic characteristics identification method and its test verification

The Structural Response Analysis of EV Battery Pack Under Random Vibration and Impact Conditions

Predicting Structure Dynamic Acceleration Based on Measured Strain

Dynamic Analysis of Support System of Permanent Magnet Traction Motors for High-Speed Trains

Analysing Vibration Environment of a Power Battery in a Running Electric Vehicle

Study on the Method of Structural Dynamic Modeling and Analyzing of the EV's Battery Pack

Dynamic Testing and Analysis of Torsional Vibration for Vehicle Powertrain on Road

Dynamic Characteristics Analysis and Structural Noise Prediction of Bridge Crane

Dynamic Load of Agricultural Machinery Drive Axle Housing Based on Field Measured Road Roughness

Dynamic load simulation and fatigue life calculation of pivotal load carrying structure of air suspension system

Dynamic Characteristic Experimental and Analysis Investigation of Rigid Frame Box Girder Bridge

Analysis of Intrinsic Characteristics and Dynamic Response of New Energy Vehicle Battery Pack System

Dynamic Characteristics Analysis on Truck Drive Axle Assembly

Dynamic research on higih-pier & long-span continuous rigid frame bridge from overload vehicle

Development of a Continuous Testing Device for Pavement Structure Bearing Capacity

The dynamic load acquisition research of a drive axle housing based on virtual prototype technology

A novel method for evaluating asphalt pavement structural performance based on vehicle vibration

Modal Test and Analysis of Dump Truck Frame