Abstract:Low-frequency noise radiated from bridge vibrations has been reported as an environmental noise problem in many countries. In order to investigate the mechanism of low-frequency noise radiated from bridge vibration, a steel bridge with a double-box is adopted for study. Modal parameters of the bridge, including natural frequency, damping ratio and mode shape, are identified from field tests by a combination of Eigensystem Realization Algorithm and Fast Fourier Transformation. Then the grillage model of the bridge is established and physics parameters of the model are updated by genetic algorithm according to identified natural frequencies. The dynamic response of the bridge by the action of a moving vehicle is calculated and assumed as the sound source of low-frequency noise. Then low-frequency noise due to bridge vibration is estimated according to sound wave propagation theories. The validity of the numerical method is verified through comparison with experimental results. Furthermore, noise reduction methods are proposed and corresponding effects are discussed. Results show that numerical simulation is feasible in assessing low-frequency noise due to traffic induced vibration of a bridge, which offers a possible way for environmental assessment as well as being a good reference for noise reduction design of bridges. The deck plate of the bridge is the primary source of low-frequency noise. Hence, increasing the stiffness of a deck plate is effective for noise control. Improving the road roughness can also reduce low-frequency noise.

Dynamic Characteristics Analysis and Structural Noise Prediction of Bridge Crane

Research on computational method and dynamic characteristics of traffic vibration of steel bridge

Prediction and research on influencing factors of structural noise of bridge crane with three-point support

Vibration and noise analysis of gear transmission system

Multi-body Dynamic Simulation and Vibro-acoustic Coupling Analysis of Bridge Crane Gearbox

Radiation Noise Analysis for Structural-Acousitc Coupling System of Gear-BOX

Noise Radiation Analysis of Structural-Acoustic Coupling System of a Gear Box

Numerical Investigation On Influence Factors Of Radiation Noise Of The Bridge Crane Helical Gear Reducer

Analytical and Computational Method of Structure-Borne Noise and Shock Resistance of Gear System

Finite Element Analysis of Dynamic Response and Structure Borne Noise of Gearbox

Prediction and Experimental Study on Structure and Radiation Noise of Subway Gearbox

Junction stiffness analysis and vibration noise prediction of wind power speed-increase gearbox

Acoustic-vibration analysis of the gear-bearing-housing coupled system

Transmission error analysis and vibration noise prediction of wind power gearbox

Numerical Simulation And Experimental Research On The Vibration, Shock And Noise Of Gear System

Dynamic Model and Numerical Simulation of Multi-stage gear-rotor-bearing System

An Approach to Calculate Radiation Noise of Gear System

Dynamic modeling and analysis for a drive axle gear transmission system

Finite Element Analysis Of Internal Excitation And Structure Borne Noise In Geared System

Low-frequency noise radiation from traffic-induced vibration of steel double-box girder bridge

Structure Noise Performance Analysis and Optimization Research on a Low-Floor Gearbox