Abstract:Cotton is a crucial raw material for the textile industry, and the quality of its initial product greatly affects the properties of the yarn and fabric. However, the impact of low temperature and moisture regain during ginning on the mechanical properties has not been extensively studied. This paper aims to address this gap by designing and analyzing a strategy for evaluating the mechanical properties of machine-harvested cotton fibers pretreated at different moisture regain levels and temperatures. Regression models for the relationship between temperature and mechanical properties under different moisture regain conditions were also established, showing good consistency. Additionally, the study examines the mechanical damage mechanism of cotton fibers during the harvesting and ginning process by observing the fiber fracture interface of different samples. Especially, those with low moisture regain exhibit a V-type fracture, while those with high moisture regain display significant fibrils exposed on the fiber body, resulting in a tearing morphology at the fracture interface. In conclusion, this study provides theoretical support for optimizing the harvesting process in cotton processing enterprises in terms of moisture regain and low temperature and makes a significant toward sustainable cotton fiber harvesting and processing technology. 棉花是纺织工业的重要原材料,其初始产品的质量极大地影响纱线和织物的性能。然而,轧棉过程中的低温和回潮对机械性能的影响尚未得到广泛研究。本文旨在通过设计和分析评估在不同回潮率水平和温度下预处理的机采棉纤维的机械性能的策略来解决这一差距。还建立了不同回潮率条件下温度与力学性能关系的回归模型,表现出良好的一致性。此外,该研究通过观察不同样品的纤维断裂界面来研究棉纤维在收获和轧花过程中的机械损伤机制。特别是,回潮率低的纤维表现出V型断裂,而回潮率高的纤维则表现出明显的原纤暴露在纤维体上,导致断裂界面处出现撕裂形貌。综上所述,本研究为棉花加工企业在回潮率和低温等方面优化采收流程提供了理论支撑,对可持续棉纤维采收加工技术具有重要意义。

Study and Evaluation on the Damage Process of Typical Apparel Fabrics with Zipper Abrasion

Experimental studies on tear failure of PVC coated fabric

A Facile Method for a Quantitative Study of the Mechanical Force Impact on Fabric Dye Loss During Domestic Washing

Investigation of the microscopic damage mechanisms in cotton fibers induced by mechanical friction

Surface crack propagation of electroplated chromium coating and cotton fabric with dry friction

Mechanical Responses and Damage Morphology of Laminated Fabrics with a Central Slit under Uniaxial Tension: A Comparison Between Analytical and Experimental Results

Impact of Fabric Ageing Damage on Its Detergency Performance

Study On Analysis Methods Of Tear Propagation Of Fabric Laminates

Abrasion performance and failure mechanism of fiber yarns based on molecular segmental differences

Yarn on yarn abrasion failure mechanism of ultrahigh molecular weight polyethylene fiber

A Study of the Mechanical Properties of Composite Laminates with Holes

Evaluation of Launderability of Electrically Conductive Fabrics for E-Textile Applications

Experimental Study of Yarn Friction Slip and Fabric Shear Deformation in Yarn Pull-out Test

Study on friction and wear of preform Z ‐directional fiber

Degradation of PVDF-Coated Fabrics after Engineering Applications: Correlations between Surface Microstructure, Physical Properties, and Mechanical Properties Based on Statistical Analysis

Study on Influence of Fabric Performance on Crease Sculpt of Garment

Mechanism of Pre-Tension on the Impact Response of Plain Weave Fabric: Experimental and Numerical Investigation

Effect of processing parameters on friction and damage of carbon yarn during three-dimensional weaving

Further Studies of Mechanical Damage on Machine-Harvested Cotton Fiber via Coupling Effect of Moisture Regains and Low Temperature

Investigation of slashing mechanisms and behavior of high-performance fabrics

Tribological Properties of Fabric Texturing in Lubrication