Abstract:This study aims to estimate the material properties of the porcine vitreous while testing it in close to its natural physiological conditions. Eighteen porcine eyes were tested within 48 h post-mortem. A custom-built computer-controlled test rig was designed to support, load and monitor the behaviour of eye globes while being subjected to dynamic rotation cycles mimicking saccade eye movement. Specimens were glued to the base of a container, surrounded by gelatin, frozen and cut in half to expose the vitreous. After thawing, the container was subjected to concentric dynamic rotations of up to 5°, 10° or 15°, while taking 50 MP photos of the specimen every 2 ms. The images were analysed by a digital image correlation algorithm to trace the movement of marked points on the vitreous surface with different radii from the centre of the posterior chamber. The initial camera image was used in building a finite-element model of the test set-up, which was used in an inverse analysis exercise to estimate the material properties of the vitreous. Angular displacements of the monitored points were up to 3.3°, 4.1° and 3.9° in response to eye rotations of 5°, 10° and 15°, respectively. With the experimental relationships between eye rotation and angular displacements used as target behaviour, the inverse analysis exercise estimated the initial shear modulus, the long-term shear modulus and the viscoelastic decay constant of the porcine vitreous as 2.10 ± 0.15 Pa, 0.50 ± 0.04 Pa and 1.20 ± 0.09 s −1 , respectively. Consideration of the viscoelasticity of the vitreous was essential to represent its experimental behaviour. Testing the vitreous in close to its normal physiological conditions produced estimations of the initial shear modulus and long-term shear modulus that were, respectively, smaller and larger than reported values (Zimberlin et al . 2010 Soft Matter 6, 3632–3635. ( doi:10.1039/b925407b ), Liu et al . 2013 J. Biomech. 46, 1321–7. ( doi:10.1016/j.jbiomech.2013.02.006) , Rossi et al . 2011 Invest. Ophthalmol. Vis. Sci. 52, 3994–4002. ( doi:10.1167/iovs.10-6477 )).

Mechanical Properties of Porcine Extraocular Muscles in Vitro

Determining Porcine Corneal Biomechanical Properties with Eye Globe Infation Tests and Simulation

Evaluation of the mechanical properties of porcine kidney

Mechanical response of porcine hind leg muscles under dynamic tensile loading

Experimental evaluation of the viscoelasticity of porcine vitreous

In vitro compressive properties of skeletal muscles and inverse finite element analysis: Comparison of human versus animals

Research on mechanical properties of the tongue muscle with a new composite constitutive model validated by experiments

Mechanical characterization of porcine corneas

Mechanical Behaviors of Tension and Relaxation of Tongue and Soft Palate: Experimental and Analytical Modeling

Tensile biomechanical properties and constitutive parameters of human corneal stroma extracted by SMILE procedure

Viscoelastic characterization of extraocular Z-myotomy

An Experimental Study on Anisotropic Mechanical Properties of Porcine Thoracic Aorta

Experimental and numerical study on the mechanical properties of cortical and spongy cranial bone of 8-week-old porcines at different strain rates

Structural Model for Viscoelastic Properties of Pericardial Bioprosthetic Valves

Mechanical characterization of stomach tissue under uniaxial tensile action

Characterization of the mechanical properties for cranial bones of 8-week-old piglets: the effect of strain rate and region

In-situ Measurement and Modeling of Mechanical Properties of Porcine Oocytes

Dynamic compressive response of porcine muscle measured using a split Hopkinson bar system with a pair of PVDF force transducers

Dynamic Tensile Response of Porcine Muscle

Modelling and simulation of porcine liver tissue indentation using finite element method and uniaxial stress-strain data

DEVELOPMENT ON THE VISCO-ELASTIC CONSTITUTIVE MODEL OF CARDIAC MUSCLE BASED ON EXPERIMENT