Abstract:2D and 3D numerical simulations with two-fluid approach were conducted to investigate the gas-liquid flow dynamic behaviour in a rectangle bubble column. In the simulations, k-ε and RNG k-ε turbulent models, which account for the influence of the bubbles on liquid phase turbulence, were employed to study the effect of such models on predication of the dynamic behaviour of the bubble plume. In addition, the influence of different interfacial force closures such as drag, lift and added mass forces were also assessed. The simulation results indicated that for the 2D cases, the use of k-ε model could merely yield a steady flow pattern with one big liquid circulation, while the use of RNG k-ε model could produce a steady flow pattern, characterised by the appearance of three large vortices. However, all the 3D simulations have captured the plume meandering behaviour. The results showed that the value of the turbulence eddy viscosity predicted with 3D simulation was one order smaller than that with 2D simulation. Particularly, the meandering period of the bubble plume predicted by RNG k-ε model, was obviously smaller than that predicted using k-ε model in 3D simulations. The former gave the average turbulence eddy viscosity to be almost one third of that predicted by the latter. The assessment of the use of different interfacial force closures and their combinations showed that the lift force has a pronounced effect on the result of bubbly flow behaviour besides the drag force. It was found that the predicted meandering period was much greater than the experimental observations without the inclusion of the lift force, while the predicted period was consistent with the experimental result when the lift force was considered. Our simulations also revealed that the inclusion of the added mass force could notably improve the prediction results.

MULTI-SCALE SIMULATION ON HYDRODYNAMIC CHARACTERISTICS IN BUBBLING FLUIDIZED BED

Novel Bubble–Emulsion Hydrodynamic Model for Gas–Solid Bubbling Fluidized Beds

Numerical Simulations of a Bubbling Fluidized Bed Reactor with an Energy Minimization Multiscale Bubble Based Model: Effect of the Mesoscale

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Dynamic Modelling of Fluidisation in Gas-Solid Bubbling Fluidised Beds

Evaluation of a Bubble-Structure Dependent Drag Model for the Simulation of Bubbling Fluidization with Geldart A Particles

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Numerical Modelling of Bubbling Flow Dynamic Behaviour in a Bubble Column

Hydromechanical Simulation of A Bubbling Fluidized Bed Using an Extended Bubble-Based Emms Model

A Bubble-Based Drag Model of Rough Sphere for the Simulation of Bubbling Fluidized Bed

Modeling of Bubble-Structure-Dependent Drag for Bubbling Fluidized Beds

Structure-dependent drag model for simulation of gas-solids fluidized beds

Multiscale Analysis of Flow Behavior of Bubbling Fluidized Bed with Clouded Bubble

A Simulation Study of Gas-Solid Two Phase Flow in a Bubbling Fluidized Bed with Various Drag Force Models

An Improved Computational Fluid Dynamics-Discrete Bubble Model for Multiphase Bubble Flow Simulation with a Wide Grid/bubble Size Ratio

CFD Simulation of Bubbling Fluidized Beds Using a Local-Structure-dependent Drag Model

Assessment of a Bubble-Based Bi-Disperse Drag Model for the Simulation of a Bubbling Fluidized Bed with a Binary Mixture

Multi-scale Numerical Simulation of Fluidized Beds:Model Applicability Assessment

Multi-scale CFD Modeling of Gas-Solid Bubbling Fluidization Accounting for Sub-Grid Information

A Clouded Bubble-Based Drag Model for the Simulations of Bubbling Fluidized Beds

Multiscale Modeling of Bubbling Fluidized Bed Reactors Using a Hybrid Eulerian-Lagrangian Dense Discrete Phase Approach