Abstract:Eulerian–Eulerian and Eulerian-Lagrangian numerical approaches are both widely used to investigate hydrodynamic behavior in dense gas-solid fluidized bed reactors, yet there has been a lack of comparative investigations involving the two. Therefore, the present work compares the numerical performance of a two-fluid model (TFM) and a dense discrete phase model (DDPM) in describing the hydrodynamic behavior of a pilot-scale bubbling bed reactor. The effects of several different parameters – drag force, grid size, fluid time-step, time-averaging interval, particle-wall specularity coefficient, particle-particle restitution coefficient, particle-wall reflection coefficient, and numbers of parcels (the latter two parameters only for the DDPM) – are investigated and compared for the two approaches using two-dimensional (2D) simulations. The numerical results for both models indicate that sub-grid drag correction based on the energy minimization and multiscale (EMMS) theory is the most essential modeling parameter to account for the multiscale structures (i.e., bubbles and void spaces) and to resolve the axial and radial solid distributions. Both the TFM and DDPM, coupled with the EMMS/bubbling drag, predict similar hydrodynamics behavior; however, the better accuracy in terms of axial and radial solids concentration profiles is achieved from the TFM approach. Further, our grid size analysis results indicate that the DDPM generates a better grid-independent solution than the TFM. This important advantage of the DDPM over TFM makes it a suitable candidate for large-scale industrial applications by employing it on much coarser grids. Meanwhile, the results from the time-step, time-averaging interval, specularity coefficient, restitution coefficient, reflection coefficient, and numbers of parcels represent a minor effect on the overall hydrodynamics behavior of the pilot-scale bubbling bed reactor.

Multiscale Modeling of Bubbling Fluidized Bed Reactors Using a Hybrid Eulerian-Lagrangian Dense Discrete Phase Approach

Numerical Simulations of a Bubbling Fluidized Bed Reactor with an Energy Minimization Multiscale Bubble Based Model: Effect of the Mesoscale

Novel Bubble–Emulsion Hydrodynamic Model for Gas–Solid Bubbling Fluidized Beds

Research Progress in Numerical Models on Gas-Solid Fluidization of Cohesive Particles

The Hydrodynamics of Low-Density Particles and Optimization of the EMMS Calculation Process

Comparative CFD Modeling of a Bubbling Bed Using a Eulerian–Eulerian Two-Fluid Model (TFM) and a Eulerian-Lagrangian Dense Discrete Phase Model (DDPM)

Verification and Validation of the DDPM-EMMS Model for Numerical Simulations of Bubbling, Turbulent and Circulating Fluidized Beds

Hydromechanical Simulation of A Bubbling Fluidized Bed Using an Extended Bubble-Based Emms Model

Multi-scale CFD Modeling of Gas-Solid Bubbling Fluidization Accounting for Sub-Grid Information

Revised Drag Calculation Method for Coarse Grid Lagrangian–Eulerian Simulation of Gas–solid Bubbling Fluidized Bed

CFD Simulation of Bubbling Fluidized Beds Using a Local-Structure-dependent Drag Model

A Simplified Bubble Size Relation Compatible with the Energy Minimization Multiscale Drag Model for Studying Hydrodynamics in a 2D Gas–Solid Tapered Fluidized Bed

Modeling of Drag with the Eulerian Approach and EMMS Theory for Heterogeneous Dense Gas–solid Two-Phase Flow

Evaluation of a Bubble-Structure Dependent Drag Model for the Simulation of Bubbling Fluidization with Geldart A Particles

Two-Fluid Model Simulations of the National Energy Technology Laboratory Bubbling Fluidized Bed Challenge Problem

A Computational Particle Fluid-Dynamics Simulation of Hydrodynamics in a Three-Dimensional Full-Loop Circulating Fluidized Bed: Effects of Particle-Size Distribution

Bubble-Based EMMS Drag Model for Particle Segregation Simulation with a Continuous Size Distribution

A Euler-Euler Hydrodynamic Modelling and Simulation of Dense Particle Flow in a Small-Scale Fluidized Bed

Heterogeneity Analysis of Gas-Solid Flow Hydrodynamics in a Pilot-Scale Fluidized Bed Reactor

Using Mesoscale Drag Model-Augmented Coarse-Grid Simulation to Design Fluidized Bed Reactor: Effect of Bed Internals and Sizes

Multi-scale Heat Transfer in Fluidized Bed Reactors by Eulerian CFD Modeling