Abstract:Fiber metal laminated sandwich tubes are made up of alternating fiber-reinforced composite and metal layers. Fiber metal laminated tubes have the advantages of the high strength and high stiffness of fiber and the toughness of metal, so they have become an excellent load-bearing and energy-absorbing, lightweight structure. Due to the complexity of the fiber layup, it is difficult to establish an analytical model of the relevant structural properties. In this work, introducing the number and volume fraction of fiber layup, based on the modified rigid–plastic model, an analytical model is established for low-velocity impacts on sandwich tubes with fiber metal laminated tubes, which provided a theoretical basis for the design of fiber–metal composite tubes. In addition, a numerical simulation was conducted for low-velocity impacts on clamped rectangular sandwich tubes with fiber metal laminated (FML) tubes and a foam core. By comparing the results obtained from the theoretical analysis and numerical calculations, it is shown that the analytical results can reasonably agree with the numerical results. The influences of the metal volume fraction (MVF), the strength ratio factor of the FML metal layer to the FML composite layer, and the relative strength of the foam on the dynamic response of the rectangular sandwich tubes with FML tubes and a metal foam core (MFC) are discussed. It is shown that by increasing the fiber content and fiber strength of the FML tubes and the foam strength, the load-carrying and energy-absorbing capacity of the rectangular sandwich tubes can be effectively improved, especially by changing the fiber properties. In addition, present analytical solutions can be applied to make predictions about the dynamic response of the rectangular sandwich tubes with FML tubes and MFC during impacts with low-velocity and reasonably heavy-mass.

Dynamic compressive response of metal orthogonal corrugated sandwich structure

Response of the orthogonal corrugated sandwich panel under low-velocity impact with different shaped impactors

Dynamic response of multilayer sandwich beams with foam-filled trapezoidal corrugated and foam cores under low-velocity impact

Dynamic response of clamped sandwich beams with foam-filled sinusoidal corrugated core subjected to low-velocity impact

Experimental and numerical simulation of dynamic response of U-type corrugated sandwich panels under low-velocity impact

On low-velocity impact response of foam-core sandwich panels

Impact resistance of composite circular corrugated core sandwich structures

Dynamic responses of corrugated cylindrical shells subjected to nonlinear low-velocity impact

Review of sandwich structures under impact loadings: Experimental, numerical and theoretical analysis

Response of aluminium corrugated sandwich panels under air blast loadings: Experiment and numerical simulation

Low-velocity impact response of aluminum alloy corrugated sandwich beams used for high-speed trains

High-velocity impact response of metallic sandwich structures with PVC foam core

Numerical research on response of hybrid corrugated sandwich plates subjected to combined blast and fragment loadings

Dynamic Crushing of All-Metallic Corrugated Panels Filled With Close-Celled Aluminum Foams

Low-velocity impact of sandwich beams with fibre-metal laminate face-sheets considering local denting effect

Low-Velocity Impact of Clamped Rectangular Sandwich Tubes with Fiber Metal Laminated Tubes

Nonlinear analysis model of the progressive damage of aluminum–wood sandwich structures under high-speed impact conditions

Numerical Simulation of Blast-resistant Performance of Aluminum Foam Sandwich Structures and Optimization

The Impulsive Response of Aluminium Foam Core Sandwich Structures

Experimental investigations into the dynamic response of sandwich panels with multi-layered corrugated cores subjected to underwater impulsive load

Dynamic performance of ultralight corrugated sandwich plate with FML face-sheets impacted by FSP-foam composite projectile