Abstract:Abstract Copper chemical mechanical polishing (CMP) in barrier layer slurries with periodate as oxidant has not been intensively studied. This work presents an investigation into copper tribocorrosion in potassium periodate-based slurries during CMP. The research focused on copper tribocorrosion behavior, the surface chemical and electrochemical reaction products, and the electrochemical mechanism during CMP. The copper surface film was characterized by Raman spectra experiments. Tribocorrosion tests combined with CMP chemical experiments were conducted to study the tribochemical behavior and wear-accelerated corrosion effect. The results show that copper corrosion is more severe in acid solutions than in alkaline conditions. The copper surface is mainly passivated with copper oxides, copper hydroxide, and copper iodide. Small amounts of copper iodate, copper periodate, and iodine could be detected under specific pH conditions. Abrasion could help to get a uniform passivation film on copper surface consisting of copper oxides, copper hydroxide, and copper iodide only. The material loss due to wear-accelerated corrosion during CMP was also investigated. The results show that under weakly alkaline conditions (pH 9 and pH 10), the wear-corrosion effect plays an important role in the total material loss due to corrosion. The wear-accelerated corrosion is mainly caused by the exposure of more cathodic reaction sites to the slurry for participation in the redox reaction and the local galvanic corrosion during the CMP process. The high wear corrosion proportion of the total corrosion (ΔIc/Icc) could help to obtain a better surface quality and desirable material removal rate during CMP.

Study on Abrasive Effect in Copper Chemical-Mechanical Polishing

Chemical effects on the tribological behavior during copper chemical mechanical planarization

Methods and Mechanistic Analysis of Improving the Dispersion of Nano Silica Colloidal Particles in Chemical Mechanical Polishing Slurries

Copper chemical mechanical polishing using a slurry-free technique

Polystyrene-Silica Composite Particles and Their Copper Chemical Mechanical Polishing Performances

Optimizing of the Colloidal Dispersity of Silica Nanoparticle Slurries for Chemical Mechanical Polishing

Effects of corrosion environments on the surface finishing of copper chemical mechanical polishing

Study on Lubricating Behavior in Chemical Mechanical Polishing

Study on the effect of nonionic surfactant in copper CMP slurry

Study on Oxidant in Chemical Mechanical Polishing of Copper

Experimental Study on Influences of Dispersant on Material Removal Rate and the Surface Roughness of Cu CMP

Study on material removal mechanism of Cu-deposited wafer during chemical mechanical polishing

Material Removal Mechanism of Copper CMP from a Chemical–Mechanical Synergy Perspective

Chemical processes in the chemical mechanical polishing of copper

Environment-friendly chemical mechanical polishing for copper with atomic surface confirmed by transmission electron microscopy

Investigation of the Behaviors of Various Electroplated Copper Films During CMP

Tribocorrosion Study of Copper During Chemical Mechanical Polishing in Potassium Periodate-Based Slurry

Newly Designed Colloidal Silica for Copper Chemical Mechanical Polishing in Electronic Packaging

Electrochemical Mechanical Polishing of Copper with High Permittivity Abrasives

An Efficient and High Quality Chemical Mechanical Polishing Method for Copper Surface in 3D TSV Integration

Research on Effects of Slurry Additives in Cucmp for Ulsi Manufacturing