Abstract:Local damage or stress concentration that forms during manufacturing and long-term use of ferromagnetic materials has a direct impact on the safety of engineering structures. Thus, accurately identifying damage and stress conditions in these materials is crucial. In this study, martensitic stainless steel, a type of ferromagnetic material, is chosen as the subject for investigation. A weak magnetic detection device is engineered specifically for this purpose, and tests are conducted on the material using this device. The stress value of the material is determined using X-ray diffraction, while magnetic induction intensity is simultaneously recorded with a weak magnetic detection device along the same path. The stress value and magnetic induction intensity are normalized, and the results are analyzed to establish a correlation between weak magnetic signals and stress. Then, a signal processing technique combining blind source separation and eigenvalue recognition is introduced to achieve stress concentration and microdefect location identification. This method is based on the correlation analysis results between weak magnetic signals and stress, as well as supporting evidence from prior studies. The experimental results demonstrate that the location of stress concentration can be accurately determined by identifying the peak or valley value of weak magnetic signals, with an error range of less than 30%. The algorithm of blind source separation and eigenvalue recognition can pinpoint the location of stress concentration and microdefects from the obtained signal. This study presents a novel nondestructive testing method for stress concentration and microdefect identification in ferromagnetic materials.

STUDY ON THE CHARACTERISTICS OF MAGNETIC MEMORY SIGNALS AT FERROMAGNETIC MATERIAL DEFECTS

Study of magnetic signals behavior at groove defect by tensile stress during online measurement of Q345R steel

The Characteristics of the Magnetic Memory Signals under Different States for Q235 Defect Samples

Characterization of the Elastic-Plastic Region Based on Magnetic Memory Effect

Effect of Defect Depth on Stress Evaluation of Carbon Steel Using the Metal Magnetic Memory Technique

Characterization of Magnetic Field in Crack Propagation Stage and Application to Non-Destructive Evaluation

The Characteristics of the Magnetic Memory Signal Under Different States for Q235 Steel Defect Samples

Relationship Between Magnetic Memory Signal and Stress

Monitoring Fatigue Damage Using Magnetic Memory Technique

A Magnetomechanical Model for the Magnetic Memory Method

Relationship Between Residual Plastic Deformation and Metal Magnetic Memory Signals of Specimens

Magnetic memory testing for high load rotating bending fatigue damage

Study of metal magnetic memory (MMM) technique using permanently installed magnetic sensor arrays

A 3-D Imaging Method for Local Shallow Defects on the Surface of Ferromagnetic Materials

Magnetic memory testing towards fatigue crack propagation of Q235 steel for remanufacturing

Numerical studies to signal characteristics with the metal magnetic memory-effect in plastically deformed samples

Detection of crack growth rate in 45 steel by metal magnetic memory

Theoretical and experimental study on metal magnetic memory technique

Magnetic field variation induced by cyclic bending stress

Fatigue Damage Evaluation on Ferromagnetic Materials Using Magnetic Memory Method

Investigation of Stress Concentration and Microdefect Identification in Ferromagnetic Materials within a Geomagnetic Field