Abstract:CFMPs (cement and fly ash mixing piles) are used to reinforce fly ash foundation to solve the problem of a large amount of fly ash accumulation in coastal areas. CFMP-fly ash composite foundation is used as the foundation of coastal and coastal engineering. Through the indoor model test, the bearing characteristics and load transfer mechanism of CFMP-fly ash composite foundation under wave load were investigated. The results show that with the increase of wave load, the horizontal resistance of the fly ash stratum increases gradually, the soil resistance moves down, and the level of resistance shows nonlinear characteristics. The pile bending moment, pile displacement, and horizontal resistance of the CFMP composite foundation are concentrated in the upper pile and fly ash stratum, which can improve the ability of the composite foundation to resist horizontal load by improving the physical and mechanical properties of the upper fly ash stratum. Through the calculation of the load–displacement curve, it is found that the measured displacement value is closer to that obtained using the p – y curve method (a method for solving nonlinear lateral resistance of piles). The hysteretic curve area of cyclic loading decreases with the increase of cyclic number. The accumulation of elastoplastic deformation of pile shows that the properties of fly ash gradually change to elastic stage, cyclic loading can reduce the horizontal deformation modulus of composite foundation CFMP caused pile—fly ash system of weakening, in peak load reaches level under the critical state displacement curve showed a trend of the rapid growth of nonlinear, cyclic cumulative failure occurs, and the cyclic load limit state is reached, which affects the service performance of the whole structure.

Analysis of Elastic Wave Velocity in Steel Fiber Reinforced Cement Mortar Composite Subjected to External Compression Loading

Experimental Study on Stress Wave Propagation in Ultra High Toughness Cementitious Composites

Compressive Behavior of Engineered Cementitious Composites under High Strain-Rate Loading

Simulation and test of flexural performance of polyvinyl alcohol-steel hybrid fiber reinforced cementitious composite

Dynamic Response of Cement–Fly Ash Mixed Pile Composite Foundation Under Wave Load

Effect of PE Fiber Content on Mechanical Behavior of Cementitious Composite

DYNAMIC SHEAR PROPERTIES OF STEEL FIBER REINFORCED CEMENT UNDER COMBINED PRESSURE AND SHEAR IMPACT LOADING

Elastic wave propagation in EPS concrete under loadings

Experimental determination of fracture parameters for crack propagation in hardening cement paste and mortar

Dynamic Properties of Fiber Reinforced Cement Mortar

Dynamic mechanical properties and wave propagation of composite rock-mortar specimens based on SHPB tests

Experimental study on loading rate and notch-to-depth ratio effects on flexural performance of self-compacting concrete with acoustic emission and digital image correlation technologies

Experimental Study and Mesoscale Finite Element Modeling of Elastic Modulus and Flexural Creep of Steel Fiber-Reinforced Mortar

STUDY ON MICROSTRUCTURE FRACTURE OF CEMENT-BASED COMPOSITES BY ACOUSTIC EMISSION TECHNIQUE

Investigation of Ultrahigh-Performance Concrete Fracture Characteristics with Different Steel Fiber Fractions Based on Acoustic Emission

Experimental and Numerical Investigations on the Stress Waves Propagation in Strain-Hardening Fiber-Reinforced Cementitious Composites: Stochastic Analysis Using Polynomial Chaos Expansions

Investigation on Dynamic Damage and Failure Property of Fiber Reinforced Cement Subject to Shock Loading

Tensile Performance of Polyvinyl Alcohol–steel Hybrid Fiber Reinforced Cementitious Composite with Impact of Water to Binder Ratio

Experiment Studies on Fracture Energy of Cement Paste and Mortar

Experimental Evaluation On Fiber Distribution Characteristics And Mechanical Properties Of Calcium Carbonate Whisker Modified Hybrid Fibers Reinforced Cementitious Composites

DYNAMIC PERFORMANCE OF CANTILEVER COMPOSITE MORTAR BEAMS WITH ELECTRO-RHEOLOGICAL FLUID