Abstract:Electrical Discharge Dressing (EDD) of fine-grained metal-bonded diamond grinding wheel is the most recognized processing method in the industry at present. In this paper, the processing method of nanosecond pulse laser dressing of fine-grained metal-bonded diamond wheel with concave surface was proposed. The main components of the heat affected zone on the sub-surface of the wheel after laser dressing were proposed. The influence of the laser circumferential overlap ratio ( O C ) on the size of the heat affected zone of the metal-bonded material was systematically studied, and the formation mechanism of the angle error of the wheel with different influence degree of two kinds of effects was explained as the result of the change of laser energy density. The results demonstrated that with the increase of O C , the burn degree and sub-surface quality of the wheel surface became worse. The optimal laser circumferential overlap ratio O C was 30 %. It was found that the laser energy was continuously lost with the decrease of the angle, and better dressing effect could be obtained by deflecting the laser. The fine-grained metal diamond wheel with concave surface dressed by the deflection nanosecond pulse laser had better surface quality and profile accuracy, but there were certain metamorphic layers. Compared with the static single-section image detection (SSID), the grinding graphite plate detection (GGPD) more reflected the actual situation, and the maximum angle, arc radius and height deviation values of the 600# concave trapezoidal contour were 0.281°, 0.0049 mm, 0.0299 mm, respectively; The maximum angle, arc radius and height deviation values of the 1000# concave V-shaped contour were 0.293°, 0.0029 mm and 0.0255 mm, respectively.

Analysis of Temperature Field for Laser Assisted Mechanical Dressing and Truing of Diamond Grinding Wheel

Research on the Analytical Thermal Model in Surface Grinding by Cup Wheel

Validation of an analytical model for grinding temperatures in surface grinding by cup wheel with numerical and experimental results

Theoretical Analysis of Temperature Field in Surface Grinding with Cup Wheel

Modeling of Laser Dressing for Metal-Bond Diamond Grinding Wheel

Laser Dressing of Resin-Bond Diamond Grinding Wheel.

Analysis of transient thermal dynamics of the ultra precision cycloid wheel forming grinding machine artificial granite bed

Researches on Dressing Diamond Grinding Wheels on Line by A Diamond Pen Aided with Laser Beam Preheating Based on Optical Fiber Delivering

Precision Truing of Electroplated Diamond Grinding Wheels Via Spray-Mist-assisted Laser Technology

Study on Laser Truing and Dressing of Diamond Grinding Wheels

Thermal defects generation mechanism in laser precision dressing of metal-bonded micro-groove diamond wheel and their influence on grinding silicon wafer

Surface Discharging Assisted Truing and Dressing of Diamond Grinding Wheels

Absorbed Energy in Laser Truing of A Small Vitrified Cbn Grinding Wheel

Effect of Incident Angle on Laser Processing of a Small Vitrified CBN Grinding Wheel

Dressing Technology of Arc Diamond Wheel by Roll Abrading in Aspheric Parallel Grinding

Experiment and Evaluation of Laser Dressing Diamond Grinding Wheel by Side Blowing

Experimental Research on Laser Dressing of Bronze Bond Diamond Grinding Wheel

Numerical simulation on hard and brittle material grinding of complex surfaces parts

Resin Bonded CBN Grinding Wheel Dressing by Laser — Simulation and Experiment

Laser dressing of fine-grained metal-bonded diamond grinding wheels with concave surface

Modeling of the temperature field in nanosecond pulsed laser ablation of single crystalline diamond