Abstract:Flow measurement is one of the mostly measured physical quantities in industry. It is of great economic importance. Pressure losses by measuring devices must be avoided and measurement errors should be as small as possible. These conditions are fulfilled with ultrasonic gas flow meter. The problem up to now was the difficult signal processing of the complex modulated ultrasonic signals. Two types of flow meter by means of ultrasound, cross correlation meter and vortex flow meter respectively, are thoroughly researched in this work. The signal processing is based on the interaction between ultrasound and turbulences, from which the ultrasound is modulated both in phase and amplitude. Analytic signal is used to model the complex modulation based on which the Hilbert Transform is introduced. The reconstructed signals through software Hilbert Transform not only keep a good result dealing with phase modulation part but also yield fairly good results when dealing with amplitude modulation part in cross correlation measurement. It is believed that the applitude modulation signal is not applicable for measurement, which is a conclusion drawn in the case of the common Quadrature Amplitude Demodulation(QAD). Demodulation is traditionally carried out by QAD. Extended Kalman Filter is applied to make demodulation in this dissertation. It is not only used in phase but also amplitude demodulation. This method, taking advantage of the same information required by using QAD, yields better demodulation results with less noise and overcomes the disadvantages such as phase jumping at high velocities using QAD. The combination of cross correlation method with vortex method forms a self-monitoring system and overcomes the systematic error of pure cross correlation method resulting in less uncertainty and higher reliability. Inclination of bluff body in vortex flow measurement is investigated and the measurement in disturbed flow is also initially studied.

A new method for the measurement of velocity ratio ofhigh power ultrasonic vibrating system

Method of medical ultrasonic power measurement based on sound field scanning with hydrophone

A new method for nondestructively measuring pressure based on the Rayleigh wave

A Method Combining Measurement Tool and Numerical Simulation for Calculating Acoustic Signals of Ultrasonic Flowmeter

A New Method for Quantitative Measurement of Blood Flow Velocity with Doppler Ultrasound

Research on Measuring Method of Concrete Pump Discharge Based on Ultrasonic Doppler Method

The Experiment on the Principle of the Ultrasonic Measurement

A Measurement System for Ultrasonic Motor Based on LabVIEW

Method to precisely measure arrival time of ultrasonic

Laser-induced Ultrasonic Surface Wave Velocity

Measurement insights and error analysis of electronic parameters for ultrasonic transducers

Signal processing and experimental technology in ultrasonic flow measurement

Effects Of Velocity Profiles On Measuring Accuracy Of Transit-Time Ultrasonic Flowmeter

Investigation On Velocity Measurement Of Underwater High-Speed Vehicle

Optimization design and research of ultrasonic flowmeter based on time difference method

Experimental System for the Measurement of the Speed of Sound in Liquids at High Pressure Using the Differential Time-of-flight Method

The Measurement on speed of the Ultrasound based on Polynomial Fit

Design of the Precise Ultrasonic Flow Measuring System

A new measurement system to evaluate powder flowability based on vibrating capillary method

The Measurement of the Velocity Outside the High Pressure Water Jet and Abrasive Water Jet Nozzle Based on the Energy Transfer Method

High Precision Measurement of Ultrasonic Wave Transmission Time