Abstract:To provide good light sources of narrow linewidth for coherent optical communication systems we have proposed a new type of external cavity semiconductor laser with multisegment cavity structure.1 Its advantages are: (1) stable single longitudinal mode operation with high side-mode suppression ratio is easily obtained; (2) two-branch output beams standing in direction can be used. In this paper we report a practical device with multisegment cavity configuration, which basically consists of a 1.5-μm antireflection coated laser diode (LD) coupled by a graded-index (GRIN) lens to a thin Fabry-Perot etalon. The etalon is fixed on a piezoelectric transducer (PZT) and its angle of inclination can be adjusted by three fine screws for laser wavelength tuning and for optimization of alignment. The facet reflectivities of the LD, GRIN lens, and F.P. etalon are matched for achieving good single longitudinal mode oscillation. Analyses and experiments indicate that the frequency instability originates mainly from the fluctuation of the environmental temperature and mechanical disturbances in external cavity lasers.2 To reduce these effects all components are stuck on a microcrystal glass plate with low expansion coefficient and their interthermal expansions are compensated, i.e., 2αi,Li ≈ 0, where αi, and Li, are the thermal expansion coefficient and lengths of each component, respectively. The LD temperature is controlled within 0.1°C using a small Peltier cooler. All the components are put in a copper box. The device size is 32 × 26 × 65 mm3 and the actual cavity length is 2-4 cm.

A SPECIAL CAVITY FOR LD-PUMPED SOLID-STATE LASERS WITH LARGE PUMP SIZE

Theoretical Analysis of the Semi-Ring and Trapezoid LD Side-Pumped Alkali Vapor Lasers

Modeling of the Static and Flowing-Gas Ring-Ld Side-Pumped Alkali Vapor Amplifiers

Mode Selection in L40 Photonic Crystal Cavities Via Spatially Distributed Pumping

Annular Photonic Crystal Defect Mode For Operation Of Single-Mode Laser

Coupled Optical and Electronic Simulations of Electrically Pumped Photonic-Crystal-Based Leds

THREE KINDS OF CAVITIES OF LD PUMPED ALL-SOLID-STATE GREEN LASER

Experimental Study of Solid - State Laser Multi - Direction Pumped by LD

Optimal Design of Lens Duct for End-Pumped Solid-State Lasers

Modeling of Pulsed Cs Vapor Lasers in Transversely Pumped Configuration

Laser diodes semicircular side-pumped laser rod with a round-sharped output

Large-aperture End-Pumped Nd:YAG Thin-Disk Laser Directly Cooled by Liquid

LD End-Pumped 1.5-W Passively CW Mode-Locked Nd:YVO4 Laser

Practical Multisegment Composite-Cavity Semiconductor Lasers

Laser-diode Pumped Right-angle Prism Cavity Elector-optic Q-switched Solid State Laser

Cavity-length Optimization for High Energy Pulse Generation in a Long Cavity Passively Mode-Locked All-Fiber Ring Laser

Experimental Study on Mode Matching of LD End-Pumped Solid State Lasers

Thin-disk laser pump schemes for large number of passes and moderate pump source quality

Pulse Characteristics Of Cavityless Solid-State Laser

Design of Resonators and Experimental Research on Solid-State Er3+:Yb3+codoped Laser

Optimizing the Cavity-Arm Ratio of V-Shaped Semiconductor Disk Lasers