Abstract:We propose a novel laser configuration that can output 3.5-$\mu$m nanosecond laser pulses based on a simple and monolithic fiber structure. Cascade-gain-switching, which converts the wavelength of nanosecond pulses from 1.55 $\mu$m to 3.5 $\mu$m by two successive gain-switching processes. Instead of using expensive pump sources at special wavelengths and bulky active or passive modulation elements for Q-switching or mode-locking, the cascade gain-switching only requires the pumping of an electric-modulated 1.55-$\mu$m pulsed laser and two continuous-wave (CW) 975-nm laser diodes. They are all standard products for fiber optic communication applications, which can greatly lower the cost of mid-infrared laser pulse generation. To investigate the feasibility of this configuration, we numerically simulated the cascade-gain-switching processes by comprehensive rate-equation models. In single-shot regime, for stable 3.5-$\mu$m pulsed lasing, the CW 975-nm pump should be turned on at least $\sim500$ $\mu$s ahead of the 1.55-$\mu$m pulsed pump. It shows that the pulse width of the 1.55-$\mu$m pump has major impact on the temporal shape of the intermediate 1.97-$\mu$m pulse while has neglected influence on the generated 3.5-$\mu$m pulse. On the other hand, increasing the CW pump power can significantly improve the output peak power and shorten the pulse when the pump power is less than $\sim4$ W. In the repetitive-pulse regime, we found the 3.5-$\mu$m pulse train can be stably outputted when the repetition rate is $<=100$ kHz. As the repetition rate increases, the duration of reaching the stable operation increases. When the repetition rate is large than 100 kHz, the stable operation cannot be established because the rate of consuming the population on the $^4I_{11/2}$ level of $Er^{3+}$ ions is faster than the rate of building the population.

Intra-cavity Cascaded Pumped 912nm/1030 Nm Dual Wavelength Laser Output

Intracavity Cascade Pumped 493.1nm Blue Laser

InGaAsP/InP Dual Wavelength Bipolar Cascade Lasers with 100 Nm Wavelength Spacing

Modeling of A Cascaded Mid-Infrared Fiber Laser at 2.78 μm and 3.44 μm Dual-Wavelength Pumped at 0.98 μm and 1.15 μm

Mid-infrared Widely Tunable Single-Mode Interband Cascade Lasers Based on V-coupled Cavities.

Intracavity doubling of a diode side-pumped Nd:YAG laser

A Dual-Wavelength Diode-End-pumped Nd:YAG Laser Operating Simultaneously at 1319 and 1338Nm

High-Power Dual-Wavelength Laser Based on Coaxial End-Pumping Scheme with Combination of Gain Media

Intracavity-pumped Yb: YAG Lasers Using the 915-Nm Absorption Line

High Power Laser Diode Pumped Nd∶YAG Continuous Wave Dual-Wavelength Laser

Compact LD End-Pumped Nd:YAG Intracavity Frequency-Tripled Quasi-Continuous 355 Nm Laser

10.6 Kw High-Brightness Cascade-End-pumped Monolithic Fiber Lasers Directly Pumped by Laser Diodes in Step-Index Large Mode Area Double Cladding Fiber

Intracavity Doubling of Cw Ld Pumped Nd:S-Fap Laser with Ktp

Cascaded Gain-Switching in the Mid-Infrared Region.

Highly efficient dual-wavelength ytterbium-doped fiber linear cavity laser based on cascaded fiber Bragg gratings

The Study on the High-Power Ld-Pumped Nd : Yag Cw Dual-Wavelength Laser

Dual-Wavelength Bi-Doped Fiber Laser Based on Cascaded Cavities

980 Nm 14-Pin Butterfly Module Dual-Channel Cw Qw Semiconductor Laser for Pumping

3.5-Μm Gain-Switch Fiber Laser

Cascade-gain-switching for generating 3.5-um nanosecond pulses from monolithic low-cost fiber lasers

Cascade-gain-switching for generating 3 . 5-μ m nanosecond pulses from low-cost monolithic fiber lasers