Abstract:The adaptive optical correction technology can effectively improve the beam quality of solid slab lasers, but with the increase of laser output power, the output beam aperture and the system volume increase gradually, which make the design of adaptive optical correction system more difficult. Therefore, under the premise of meeting the requirements of conjugate detection in the adaptive optical correction system, it is of certain research significance to optimize the size parameters of the detection system as a whole, and realize the detection of multiple parameters such as wavefront phase and beam quality evaluation. In this paper, we realized the multi-parameter detection of 160 mm x120 mm rectangular beam emitted by slab laser under the condition that the overall size of the system is 350 mm x180 mm x220 mm (length x width x height). According to the technical requirements of large detection apertures, limitation of tube length and long exit pupil distance, firstly, the dual-Gaussian initial structure was used to eliminate the aberration. Combined with the aspheric surface technology, the design scheme of splitting detection after high-ratio beam compression was adopted to realize the simultaneous detection and evaluation of multiple parameters. Secondly, the initial parameters of the system were determined based on the principles of telephoto imaging and conjugate imaging. Thirdly, the simulation model of the detection system was established to analyze the imaging quality and the tolerance of the system, which were implemented to provide the basis for the construction of the experiment. Finally, the experiments were carried out to verify the design results. Results indicate that the conjugate wavefront detection, light intensity uniformity detection and beam quality evaluation of 160 mm x 120 mm rectangular beam can be realized under the conditions of the object-image conjugation and size constraint conditions. In the experiment, the beta factor of the measured beam is 1.24 times the diffraction limit, and the uniformity is 73.8 %, which meet the technical requirements.

Study on parameter measurement precision of high energy laser beam with large aperture

A High-Precision Laser Displacement Measurement System

Calibration for the Errors Resulted from Aberration in Long Focal Length Measurement

Intelligent Measuring System for Performance Parameters of Laser Range Finder

On-line Parameters Measurement Method for High Energy Laser with Large Beam Profile

Influence of Optical Interference and System Aberration on Laser Beam Parameter Measurement Precision

Calibration technology and application of laser power meter

Analysis of the Effects on Ultra-Short Laser Pulse Beam Quality Caused by Errors in Optical Systems

Study on the Precision Measurement of High-Flux Large Aperture Sampling Grating

Study on some key technique of large scale laser measuring machine

Experimental Study on Beam Parameter Measurement System by Using Area Array CCD

Study on Wide-range Device for High Precision Measurement

Photodetector Array Target Calibration Technology

Design of optical system for quality evaluation of a large rectangular aperture laser beam

Key Factors in Accurate Beam Characterization Application

Measurement System with High Accuracy for Laser Beam Quality.

Study on Testing Device of Pulse Laser Range Equipment

Research on Accurate Control of Energy in Calibration System of Threshold Value of Laser Seeker

Study on Laser Parameter Measurement System Based on Cone-Arranged Fibers and CCD Camera

Study on Method of Radiometric Calibration for Precision Measurement of Micro Size Damage Site

Electro-optical Equivalent Calibration Technology for High-Energy Laser Energy Meters