Abstract:In order to study the effect of polycarboxylate superplasticizer (PCE) on the microstructure and strength characteristics of tailings paste, a total of 6 tailings paste combinations including 2 cement-sand ratios (20%, 40%) and 3 water reducer dosages (0, 0.40%, 0.80%) were investigated based on the indoor microstructure test (porosity measurement, XRD test, and SEM observation) and mechanical properties method. The strength of test blocks at different ages was obtained by numerical simulation. The results showed that: 1) The water reducer can effectively reduce the porosity of the tailings paste, and the reduction effect was more significant in the condition of high cement-sand ratios. Meanwhile, high cement-sand ratio is conductive to generate more beneficial hydrates such as portlandite; 2) Compared with the significant effect of cementitious agent on the tensile strength σ t of the paste, the effect of water reducer on σ t is weak. Accordingly, the σ t of the tailings paste is much more sensitive to cementitious agent than water reduce; 3) SEM images show that the better ratio of slurry containing polycarboxylic acid superplasticizer has more C-S-H cementitious content, smaller pore size and shorter molecular chain between particles, indicating that the particles are more encapsulated and the early strength is improved. 4) The incorporation of water reducer enhancement was particularly significant under the condition of triaxial compression. However, the presence of water reducer did not change its deformation characteristics, when the confining pressure is low, the strain softening appears; and when the confining pressure is high, it transforms to strain hardening. The peak strain ε 0 and the confining pressure σ 3 had a linear relationship; 5) The strength of the paste was significantly affected by the confining pressure σ 3 under different conditions. The peak intensity σ 1 and the confining pressure σ 3 satisfied a linear relationship, while the residual strength σ r and the confining pressure σ 3 satisfied a quadratic polynomial fitting relationship. The strength parameters cohesion c and internal friction angle φ were both positively correlated with the water reducer dosage.

Characteristics of Hadley grains in hardened cement paste modified by redispersible polymer powders

Study on the retardation of re-dispersible polymer powders on cement hydration based on morphologies of Ca( OH) 2

Influence of Superplasticizers on Early Age Drying Shrinkage of Cement Paste with the Same Consistency

Effects of Redispersible Polymer Powders on the Structural Build-Up of 3D Printing Cement Paste with and Without Hydroxypropyl Methylcellulose

Effect of Particle Size Distribution on the Hydration and Compressive Strength Development of Α-Calcium Sulfate Hemihydrate Paste

Effects and Mechanism of Hyperbranched Phosphate Polycarboxylate Superplasticizers on Reducing Viscosity of Cement Paste

Rheological Properties and Early-Age Microstructure of Cement Pastes with Limestone Powder, Redispersible Polymer Powder and Cellulose Ether

Investigating the effect of polycarboxylate-ether based superplasticizer on the microstructure of cement paste during the setting process

Characterization of the Nanoparticles Formed in Aqueous Phase of Hydrating Cement Pastes in the Presence of PCEs

BSE‐IA Reveals Retardation Mechanisms of Polymer Powders on Cement Hydration

Rheological and early hydration of cementitious material containing recycled concrete powders collected from recycled aggregates

Experimental Research on the Microstructure and Strength Characteristics of Tailings Paste Containing Wate Reducer

Study on rheological, adsorption and hydration properties of cement slurries incorporated with EPEG-based polycarboxylate superplasticizers

Particle aggregation and breakage kinetics in cemented paste backfill

Characterization of the Mesostructural Organization of Cement Particles in Fresh Cement Paste

Distribution of porosity surrounding a microfiber in cement paste

Effect of Self-Desiccation on the Pore Structure of Paste and Mortar Incorporating 70% Ggbs

Redispersible Acrylic Ester Polymers: Effect of Polymer Property Changes Due to Polymerization Method Modification and Functional Additives on the Performance of Polymer Cement Mortar

Microstructure and Flowability of Fresh Cement Paste in Different Dispersions Media

Rheological properties and microstructure of fresh cement pastes with varied dispersion media and superplasticizers

Influence of Hardened Paste Microstructure on Rheological Property of Cementing Slurries with High Density