Abstract:Integrated systems are facing complex and changing environments with the wide application of atmospheric LiDAR in civil, aerospace, and military fields. Traditional analysis methods employ optical software to evaluate the optical performance of integrated systems, and cannot comprehensively consider the influence of optical and mechanical coupling on the optical performance of the integrated system, resulting in the unsatisfactory accuracy of the analysis results. Optical–mechanical integration technology provides a promising solution to this problem. A small-field-of-view LiDAR system with high repetition frequency, low energy, and single-photon detection technology was taken as an example in this study, and the Zernike polynomial fitting algorithm was programmed to enable transmission between optical and mechanical data. Optical–mechanical integration technology was employed to obtain the optical parameters of the integrated system under a gravity load in the process of designing the optical–mechanical structure of the integrated system. The experimental validation results revealed that the optical–mechanical integration analysis of the divergence angle of the transmission unit resulted in an error of 2.586%. The focal length of the telescope increased by 89 μm, its field of view was 244 μrad, and the error of the detector target surface spot was 4.196%. The continuous day/night detection results showed that the system could accurately detect the temporal and spatial variations in clouds and aerosols. The inverted optical depths were experimentally compared with those obtained using a solar photometer. The average optical depth was 0.314, as detected using LiDAR, and 0.329, as detected by the sun photometer, with an average detection error of 4.559%. Therefore, optical–mechanical integration analysis can effectively improve the stability of the structure of highly integrated and complex optical systems.

Review of Thermal-Structural-optical Integrated Analysis of Space Remote Sensor

Measurement and analysis about the strain of fiber opitical loop

Advances in Spatial Analog Optical Computing Devices

Research on Two Optical Methods for Aspheric Measurement

Influence of temperature on infrared optical system and athermal design

Synthetic Performance Evaluation System of Infrared Hybrid Optical System

Athermal design of long-wave infrared optical system with hybrid refractive/diffractive

A Review of Multimode Interference in Tapered Optical Fibers and Related Applications

Optical Properties of Nonspherical Atmospheric Particles and Relevant Applications

Optimization of Transverse Translation Diverse Phase Retrieval for Optical Elements with Mid-Spatial Frequency Errors

Thermal integration analysis of optical machines for space-based laser communications

Influence of thermal radiations in infrared optical systems

Analysis Methods for Polarization State and Energy Transmission of Rays Propagating in Optical Systems

Application of Athermalisation in Optical Systems

Recent Developments of Interferometric Wavefront Sensing

A simulation imaging method for actual optical system and results analysis

Analytical Model of Thermal Field in Polymer Thermo-Optic Devices

Parameter Rebuilding and Image Quality Evaluation of Optical System at Gradient Temperature

A New Method for Analyzing Aero-Optical Effects with Transient Simulation

Passive Athermal Optical Design Method Considering Thermal-Induced Surface Deformation

Optical–Mechanical Integration Analysis and Validation of LiDAR Integrated Systems with a Small Field of View and High Repetition Frequency