Abstract:The purpose of air-conditioning systems is to provide a suitable indoor environment with respect to temperature, humidity and fresh air. Liquid desiccant dehumidification constitutes an effective method for extracting moisture from humid air with less energy consumption. Current studies mainly focus on dehumidification system under certain heat and mass transfer ability (number of mass transfer units NTUm). This paper will investigate NTUm of counter-flow packing tower and its influence on system performance. An experiment including a counter-flow packing tower was conducted. When the height of tower was 0.7 m, the volumetric mass transfer coefficient was between 1-4 kg/(m(3).s) and NTUm presented a range between 0.9-1.4, when air flow rate changes from 1 kg/(m(2) s) to 2.5 kg/(m(2) s). When the height changed to 2.1 m, the NTUm of the tower presented a variation from 3.3 to 4.3. Furthermore, a simulation model is developed, which is validated by experimental data and past research results. The influence of NTUm on total circulation flow path is mainly caused by heat and cold offset and an NTUm value approximately of 4 constitutes a suitable value of increasing heat and mass transfer ability. Comparing three typical flow paths, when NTUm is lower than 3.5, inter-stage circulation presents improved performance in system COP. When NTUm is large, total circulation is efficient. The system COP cross points of flow paths are caused by heat and cold offset and concentration difference of the solution circulation between the dehumidifier and the regenerator, which can be quantified by loss coefficient s and chi respectively. The heat and mass transfer ability of the system should be considered in the designing process of flow path configuration to obtain an efficient performance for different range of NTUm. (c) 2017 Elsevier B.V. All rights reserved.

Experimental Study on the Flow and Heat Transfer Characteristic of Saturated Moist Air-Water in Packing

Study on the Heat and Mass Transfer Characteristics of Wet Air and Solution on the Surface of Corrugated Packings at Lower Ambient Pressure

Experimental Study of the Flow and Heat Transfer of a Gas–water Mixture Through a Packed Channel

Research on heat and mass transfer characteristics of a counterflow wet cooling tower using a new type of straight wave packing

Experiment and numerical study on thermal performance of counterflow wet cooling tower filled with double S-wave packing

An Experimental Study on the Dehumidification Performance of a Counter Flow Liquid Desiccant Dehumidifier

Numerical investigation on the thermal-flow performance of humid air-water in the interspace outside staggered tube bundles

Experimental Research on Heat Transfer of Closed Cooling Tower with Packing

Heat Transfer in a Novel Microwave Heating Device Coupled with Atomization Feeding

Theoretical Investigation on Thermal Performance of New Structure Closed Wet Cooling Tower

Investigation on the Coupled Heat and Mass Transfer Process Between Extremely High Humidity Air and Liquid Desiccant in the Counter-Flow Adiabatic Packed Tower

Experimental Study and Analysis of Heat and Mass Transfer Ability of Counter-Flow Packing Tower and Liquid Desiccant Dehumidification System

Numerical investigation on heat-mass transfer and correlations of humid air-water outside staggered tube bundles

Flue gas-water direct-contact heat transfer performances

Water-saving performance study of water conservation and plume abatement device in wet mechanical draft cooling towers

Mixed convective heat transfer characteristics and mechanisms in structured packed beds

Experimental Study On The Filtration Efficiency Of Structured Packing Air Handling Processors

Theoretical and Experimental Study on the Water Curtain Shape and Mechanical Relationship of the Smoke Control System

Experimental Investigation on Humidifying Performance of Counter Flow Spray Saturator for Humid Air Turbine Cycle

Experimental Research on Convection Heat Transfer in Sintered Porous Plate Channels