Abstract:The liquid viscosity of hydrocarbon compounds is essential in the chemical engineering process design and optimization. In this paper, we developed a quantitative structure–property relationship (QSPR) model to predict the hydrocarbon viscosity at different temperatures from the chemical structure. We collected viscosity data at different temperatures of 261 hydrocarbon compounds (C3–C64), covering n-paraffins, isoparaffins, olefins, alkynes, monocyclic and polycyclic cycloalkanes, and aromatics. We regressed the experimental data using an improved Andrade equation at first. Hydrocarbon viscosity versus temperature curves were characterized by only two parameters (named B and T 0). The QSPR model was then built to capture the complex dependence of the Andrade equation parameters upon the chemical structures. A total of 36 key chemical features (including 15 basic groups, 20 united groups, and molecular weights) were manually selected through the trial-and-error process. An artificial neural network was trained to correlate the Andrade model parameters to the selected chemical features. The average relative errors for B and T 0 predictions are 2.87 and 1.05%, respectively. The viscosity versus temperature profile was calculated from the predicted Andrade model parameters, reaching the mean absolute error at a value of 0.10 mPa s. We also proved that the established QSPR model can describe the viscosity versus temperature profile of different isomers, such as isoparaffins, with different branch degrees and aromatic hydrocarbons with different substituent positions. At last, we applied the QSPR model to predict gasoline and diesel viscosities based on the measured molecular composition. A good agreement was observed between predicted and experimental data (absolute mean deviation equals 0.21 mPa s), demonstrating that it has capacity to calculate viscosity of hydrocarbon mixtures.

A Viscosity Model for Oxygenated Fuel

Viscosity of Oxygenated Fuel: A Model Based on Eyring's Absolute Rate Theory

Viscosity modeling of some oxygenated fuels

Correlation for Viscosities of Pure Liquids at High Pressures

Experimental and Modeling Investigations of Density and Viscosity for the Ternary (N-Octane Plus Ethylcyclohexane Plus Ethylbenzene) Mixtures

Experimental and Modeling Investigations of Density and Viscosity for the Ternary ( N -Octane + Ethylcyclohexane + Ethylbenzene) Mixtures

Calculation of Viscosities of Fluid Mixtures at Atmospheric Pressure by Molecular Thermodynamic Model for Chain-Like Fluids

Viscosities of Fatty Acid Esters: A Study on Various Semi-Empirical Models

A Viscosity Model of Liquid n-Alkanes at High Pressures

Model for predicting volatility of fuel blends

Viscosity Measurement of Endothermic Fuels at Temperatures from 303 K to 673 K and Pressures Up to 5.00 MPa

A Viscosity Model of Liquid Mixtures under High Pressure Based on an Equation of State

An Improved Viscosity Model for CO 2 -Crude System

Comparative Research on Laminar Flame Propagation for Four C8 Fuels

Analyses of Surrogate Models for Calculating Thermophysical Properties of Aviation Kerosene RP-3 at Supercritical Pressures

Correlation of Viscosities for Alkane, Aromatic and Alcohol Family at High Pressure by Modified Tait Equation

Measurements and Predictive Models for the Viscosity of Coal-Based Kerosene at Temperatures up to 673 K and Pressures up to 40 MPa

Quantitative Structure–Property Relationship Model for Hydrocarbon Liquid Viscosity Prediction

Density And Viscosity Of Ternary Mixture Of Cyclopentanol Plus Exo-Tetrahydrodicyclopentadiene+1,3-Dimethyladamantane

Association Effect on the Density, Viscosity and Excess Properties of Fatty Acid Ester + Alcohol Mixtures: Experiment and Modeling

Preferential Droplet Vaporization of a 24-Component Mixture under Different Ambient Temperature, Pressure and Force Convection