Abstract:In this paper, a wind turbine mechanical load optimization control strategy based on an accurate wind speed estimator with time series Broad Learning System Method (BLSM) is designed, simulated and verified. The OPEN‐FAST is used to conduct a simulation comparison study on mechanical load characteristics of wind turbine before and after the implementation of the optimization control strategy. And field empirical mechanical load tests are performed on the wind turbine, which is configured with BLSM load optimization control technology. The findings indicate that the implementation of this control strategy can significantly mitigate the ultimate and fatigue loads of wind turbines, particularly the fatigue loads of tower base tilt and roll bending moments, with a reduction rate of approximately 6.2% and 4.3%, respectively. With the rapid development of wind power, the power performance and mechanical load characteristics of wind turbine are simultaneously considered and focused. Normally, wind turbine senses the incoming flow characteristics through the nacelle mounted anemometer, due to the inability to perceive the characteristics of wind speed in advance, the control strategy makes the wind turbine itself to be at a passive state during the operation process. In this paper, a wind turbine mechanical load optimization control strategy based on an accurate wind speed estimator with time series Broad Learning System Method (BLSM) is designed, simulated and also verified. Firstly, the basic control theory of the BLSM and also a mechanical load optimization controller is designed. Then the OpenFAST is used to conduct a full‐life cycle simulation comparison study on mechanical load characteristics of wind turbine before and after the implementation of the optimization control strategy. Finally, a field empirical mechanical load test is performed on the wind turbine, which is configured with BLSM mechanical load optimization control technology. The findings indicate that the implementation of this control strategy can significantly mitigate the ultimate and fatigue loads of wind turbines, particularly the fatigue loads of tower base tilt and roll bending moments, with a reduction rate of approximately 6.2% and 4.3%, respectively.

Effect of Various Sensing Signals on Smart Load Control of Wind Turbine Blade

Smart Load Control of the Large-Scale Offshore Wind Turbine Blades Subject to Wake Effect

Smart load control on large-scale wind turbine blades due to extreme coherent gust with direction change

Effect of Smart Rotor Control Using a Deformable Trailing Edge Flap on Load Reduction under Normal and Extreme Turbulence

A comparison of smart rotor control approaches using trailing edge flaps and individual pitch control

Adaptive Dual-layer Sliding Mode Control for Wind Turbines with Estimated Wind Speed

Wind Turbine Aerodynamics and Loads Control in Wind Shear Flow

Load Control of Wind Turbine Based on Model-free Adaptive Controller

Multi-Objective Offshore Wind Farm Wake Redirection Optimization for Power Maximization and Load Reduction

Inverse Optimal Adaptive Neural Power Regulation Control for Variable-Speed Wind Turbines with Load Mitigation

RESEARCH ON THE LOAD CONTROL OF WIND TURBINES BASED ON INDIVIDUAL PITCH TECHNOLOGY

Loading System and Control Strategy for Simulating Wind Turbine Loads

Load analysis and power control of large wind turbine based on wind shear and tower shadow

Optimization Control for Flapping Load Mitigation and Output Power Levelling of Wind Turbine

Wind turbine load optimization control and verification based on wind speed estimator with time series broad learning system method

3D Multiscale Dynamic Analysis of Offshore Wind Turbine Blade under Fully Coupled Loads

Asymmetric Load Control Method for Individual Pitch of Horizontal Axis Marine Current Turbine

Characteristics Research and Mechanism Analysis of Large Scale Wind Turbine Blades in Azimuth by Using DTEF

Hybrid Intelligent Feedforward-Feedback Pitch Control for VSWT with Predicted Wind Speed

Active alleviation of fatigue stress on blades by adaptively maneuvered deformable trailing edge flaps (DTEF)

A Study on the Capability of Backward Swept Blades to Mitigate Loads of Wind Turbines in Shear Flow