Abstract:The study of the structural strength and stiffness of wind turbine blades is an important foundation and guarantee for analyzing the stability and reliability of the complete wind turbine. By analyzing the results of static load experiments and finite element calculation, the stress, strain and deflection of blades can be more precisely determined so as to assess the structural characteristics of blades. We conducted static load tests on the medium-size experimental blades developed by the Institute of Engineering Thermophysics, Chinese Academy of Sciences, and obtained the deflection conditions of flap-wise and edgewise bendings, as well as the analytic results on the strain of the main beams and trailing edges. Meanwhile, a finite element model of blades was built using ANSYS to analyze the maximum deformation, stress, and strain. The corresponding results were compared with those of static load experiments. Then the strain and bending properties of blades under the static load were investigated, and the characteristics of the safety application of blades were verified. The results show that: 1)Within the range of 100% design load, the deflection of edgewise and flapwise directions presented a linear relationship with the applied loads. 2) After the loads in the flapwise direction exceeded 100% design load, a non-linear relationship between the blade bending and the applied loads were found. 3)The blade beam and trailing edge retain good stiffness properties under big strain conditions, and the maximum deformation appeared at the maximum chord length of the trailing edge of the blades. Our results on the static load experiments were basically consistent with the finite element model simulation, which verified the accuracy of the results of the static load experiment and finite element simulation of blades.

Characteristics Research and Mechanism Analysis of Large Scale Wind Turbine Blades in Azimuth by Using DTEF

Analysing the Influence in Real-Time Calculation Fatigue Consume Caused by Model Layer of Turbing Rotor

Effect of Various Sensing Signals on Smart Load Control of Wind Turbine Blade

Smart load control on large-scale wind turbine blades due to extreme coherent gust with direction change

Damage Mode Identification of Composite Wind Turbine Blade under Accelerated Fatigue Loads Using Acoustic Emission and Machine Learning

Effect of Smart Rotor Control Using a Deformable Trailing Edge Flap on Load Reduction under Normal and Extreme Turbulence

3D Multiscale Dynamic Analysis of Offshore Wind Turbine Blade under Fully Coupled Loads

Active alleviation of fatigue stress on blades by adaptively maneuvered deformable trailing edge flaps (DTEF)

THE RESEARCH ON LARGE SCALE WIND TURBINE INDIVIDUAL BLADE PITCH CONTROL SYSTEM

Performance and Effect of Load Mitigation of a Trailing-Edge Flap in a Large-Scale Offshore Wind Turbine

Dynamic Strain Distribution Monitoring and Fatigue Damage Analysis on a 100 kW Wind Turbine Blade Based on Field Aerodynamic Measurements

Wind Turbine Aerodynamics and Loads Control in Wind Shear Flow

Aerodynamic Effect of Deflection Angle of Trailing Edge Flap on Vertical Axis Wind Turbine with Different Airfoils

Smart Load Control of the Large-Scale Offshore Wind Turbine Blades Subject to Wake Effect

Load analysis and power control of large wind turbine based on wind shear and tower shadow

Data-driven control of the coupled loads for floating wind turbine systems based on deformable trailing edge flaps

A Study on Influence of Flapping Dynamic Characteristics on Vibration Control of Active Rotor with Trailing-Edge Flaps

A Study on the Structural Characteristics of the Blades of Wind Turbines under Static Load Condition

Multiaxial Strain Analysis in Large Wind Turbine Blades under Full-scale Fatigue Testing

Experimental on the fatigue failure areas of wind turbine blades’ rotating fundamental frequency

A Numerical Method for the Dynamics Analysis of Blade Fracture Faults in Wind Turbines Using Geometrically Exact Beam Theory and Its Validation