Abstract:In this paper, a wind turbine mechanical load optimization control strategy based on an accurate wind speed estimator with time series Broad Learning System Method (BLSM) is designed, simulated and verified. The OPEN‐FAST is used to conduct a simulation comparison study on mechanical load characteristics of wind turbine before and after the implementation of the optimization control strategy. And field empirical mechanical load tests are performed on the wind turbine, which is configured with BLSM load optimization control technology. The findings indicate that the implementation of this control strategy can significantly mitigate the ultimate and fatigue loads of wind turbines, particularly the fatigue loads of tower base tilt and roll bending moments, with a reduction rate of approximately 6.2% and 4.3%, respectively. With the rapid development of wind power, the power performance and mechanical load characteristics of wind turbine are simultaneously considered and focused. Normally, wind turbine senses the incoming flow characteristics through the nacelle mounted anemometer, due to the inability to perceive the characteristics of wind speed in advance, the control strategy makes the wind turbine itself to be at a passive state during the operation process. In this paper, a wind turbine mechanical load optimization control strategy based on an accurate wind speed estimator with time series Broad Learning System Method (BLSM) is designed, simulated and also verified. Firstly, the basic control theory of the BLSM and also a mechanical load optimization controller is designed. Then the OpenFAST is used to conduct a full‐life cycle simulation comparison study on mechanical load characteristics of wind turbine before and after the implementation of the optimization control strategy. Finally, a field empirical mechanical load test is performed on the wind turbine, which is configured with BLSM mechanical load optimization control technology. The findings indicate that the implementation of this control strategy can significantly mitigate the ultimate and fatigue loads of wind turbines, particularly the fatigue loads of tower base tilt and roll bending moments, with a reduction rate of approximately 6.2% and 4.3%, respectively.

Wind turbine load optimization control and verification based on wind speed estimator with time series broad learning system method

Adaptive Dual-layer Sliding Mode Control for Wind Turbines with Estimated Wind Speed

Loading System and Control Strategy for Simulating Wind Turbine Loads

Inverse Optimal Adaptive Neural Power Regulation Control for Variable-Speed Wind Turbines with Load Mitigation

Multi-Objective Offshore Wind Farm Wake Redirection Optimization for Power Maximization and Load Reduction

Load Control of Wind Turbine Based on Model-free Adaptive Controller

An Improved Optimal Torque Control Based on Estimated Wind Speed for Wind Turbines

Hybrid Intelligent Feedforward-Feedback Pitch Control for VSWT with Predicted Wind Speed

Effective Wind Speed Estimation and Prediction Based Feedforward Feedback Pitch Control for Wind Turbines.

Optimization Control for Flapping Load Mitigation and Output Power Levelling of Wind Turbine

3D Multiscale Dynamic Analysis of Offshore Wind Turbine Blade under Fully Coupled Loads

Loading Methodology and Dynamics Analysis of the Digital-Servo Hydraulic Cylinders Group in Large Wind Turbine Drivetrain Test Bench

Effect of Various Sensing Signals on Smart Load Control of Wind Turbine Blade

Reproduction of five degree-of-freedom loads for wind turbine using equispaced electro-hydraulic actuators

Effective Wind Speed Estimation Based Maximum Power Point Tracking Control for Variable-Speed Wind Turbine

Time-domain fatigue damage assessment for wind turbine tower bolts under yaw optimization control at offshore wind farm

Analysis of Frequency Regulation Capability and Fatigue Loads of Wind Turbine Based on Over-Speed Control

Model predictive control strategy in waked wind farms for optimal fatigue loads

Quasi-static closed-loop wind-farm control for combined power and fatigue optimization

Smart Load Control of the Large-Scale Offshore Wind Turbine Blades Subject to Wake Effect